|
|
|
#1
11-06-2009, 11:44 AM
|
||||
|
||||
Charles Daly field grade driving me nuts
Ok here is my nightmare.
I take 3 shells and number them with a sharpie #1 in the chamber #3 then #2 in the tube Fire #1, #2 lands between my feet, #3 chambers I have done a complete tear down and clean All is ok for about 5-10 shots then it starts again. Any ideas where to look for something binding or not binding like it should? 
|
|
#5
11-09-2009, 08:00 AM
|
||||
|
||||
|
Originally Posted by res1b3uq
Sorry, should have been more specific
This is a 12ga Shotgun http://www.charlesdaly.com/fsemi.asp
|
|
#6
11-09-2009, 08:02 AM
|
||||
|
||||
|
Just a good grease....let me also add that I'd clean the beejabbers outta it first w/a good degreaser. Sticking things are sometimes caused by dirt/dust an' old grease that we don't get out...<don't ask how I know>
|
|
#7
11-09-2009, 08:04 AM
|
||||
|
||||
|
And yeah - I saw where you talked about having cleaned it.....but you never know - sometimes we miss stuff. Pay attention to the mag tube, as well - a bit of debris/dirt could be causing problems (don't know how, but when you're trying to find a problem, it pays to watch every detail).
|
|
#8
11-09-2009, 12:30 PM
|
||||
|
||||
|
well I see a couple of cans of foaming bore cleaner and lots of #9 in its future this weekend and try some grease instead of just oil
__________________
Join us as we remind the obamanation what we stand for www.secondamendmentmarch.com Beyond Bitter, now I am pissed I know how many I own, not enough... Tax Revolt, I refuse to pay for someone to be on welfare anymore.
|
|
#9
11-09-2009, 12:52 PM
|
||||
|
||||
|
Yeah - if you were closer, we'd toss it on my bench and give it a REAL solid clean-up an' then lube it with some of the stuff that I got from my Dad and Grandpa. It's cleared up more'n one slide for me - dunno how/why - ya can't find it any more, but it seemed like once applied, it kept stuff working fine from then on with just regular lubin'.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
