What did you do today in the world of reloading?

[rp-]

I just realized what I forgot to order, breech lock bushings.

I wonder what else I forgot.

The press should come with 1 or 3. I think my single stage came with 3.

Sent from my LM-G820 using Tapatalk

 

[jrbfishn]

I wish mine did. I have them for all but one set of dies. I need to order some more.

Sent by an idjit coffeeholic from my SM-G892A using Tapatalk

 

[xdmikey]

Aren’t those like the LNL bushings?

 

[Dancing Heretik]

Aren’t those like the LNL bushings?

Yes.

 

[rp-]

Little different. Lee bushings are threaded. The lnl bushings have a cam lock design.

Sent from my LM-G820 using Tapatalk

 

[Steven Walker]

Berry’s just delivered 500 .40 155 JRN for my .40 and 10MM
Received 500 180 Grain from a seller on Gunbroker
Loaded up 500 9mm on my new to me Dillon 550 press.
Started on 500 10mm on the same Dillon.
Great press, have been using Hornady progressive for many years and really like the Dillon.
Trying to get back into trap shooting. Looking for a good progressive as mine was stolen.

 

[xdmikey]

Not to slam our sales area here but there’s a lot of Dillon stuff being offered on arfcom.

 

[Ozzman]

You must have slept through math class.

2:1 is a ratio. You can make ANY size batch you want as long as you use two parts of one and one part of the other.

So 2 lbs of soft lead to every 1 lb of Linotype is NOT a 2:1 ratio?? lol ok, Leonard.

 

[Ozzman]

2:1 is closer to 13 bhn. 3:1 is 11.7.

You are really splitting hairs. You get 13 and I get 12. Big deal. Water quench and you should get around 14 (in my experience). It's not that hard.

 

[TheMailMan]

So 2 lbs of soft lead to every 1 lb of Linotype is NOT a 2:1 ratio?? lol ok, Leonard.

The person I responded to didn't know if a 2:1 ratio would fit in his 10 lb pot.

 

[TheMailMan]

You are really splitting hairs. You get 13 and I get 12. Big deal. Water quench and you should get around 14 (in my experience). It's not that hard.

I'm relying on an alloy calculator for my numbers. The calculator shows for a 2:1 ratio you should get 12.7, if you're rounding that's 13. Unless you work for the Government.

 

[Ozzman]

The person I responded to didn't know if a 2:1 ratio would fit in his 10 lb pot.

Oh, I see. It read like you were talking to me. My apologies.

 

[Ozzman]

I'm relying on an alloy calculator for my numbers. The calculator shows for a 2:1 ratio you should get 12.7, if you're rounding that's 13. Unless you work for the Government.

I rely on the measurement of the indention on the Lee table.
0.062 inches or something like that

 

[rp-]

Same team guys. This isn't Facebook. We're all friends here.

Sent from my LM-G820 using Tapatalk

 

[TxStetson]

It's not that hard.

I see what you did there.

 

[TxStetson]

Same team guys. This isn't Facebook. We're all friends here.

Sent from my LM-G820 using Tapatalk

Friends-ish?

 

[TheMailMan]

I broke in a new mold. 8 cavity H&G 275 clone. This thing rains boolits. This pic was taken after I had coated 17.5 lbs and refilled the pot.

 

[TheMailMan]

The bases on those thing are so well defined it feels like they are going to cut you.

 

[Mills]

Caliber change from 30 carbine to 9mm on ole blue.
Don’t need any 9mm loaded, but when I do, it’s ready.

 

[xdmikey]

MailMan, beautiful bullets but the way. Is a bathroom scal sufficient to try to weigh this stuff? It's all I have aside from an RCBS 1010.