NSFW: Super Post Whore Thread v2.0

[Fishkiller]

Anyone know a good way to get rid of rust on a gun? This was given to me and I figure I should clean it up. Gun is a High Standard Model HB. Shoots fine. Any assist is appreciated

Fixed it. Rust not rush

 

[Coiled]

Anyone know a good way to get rid of rush

Yank that big honkin' 8track outta the dash already, it's 2023 for gawds sakes.

 

[msharley]

A good soak in ATF....a week or two. (time is your friend)

ATF wetted ALL COPPER CHORE BOY & a couple ALL COPPER PENNIES... some gentle rubbing and it will be as good as it gets.


No steel wool...emphasis on GENTLE RUBBING with either the ALL COPPER CHORE BOY & ALL COPPER PENNIES in the corners...

Use plenty of ATF (can cut it with fuel...if you need it thinner)...

 

[Coiled]

Are the pennies used as a scraper?

 

[General Zod]

The real question is where to find all copper pennies this day and age.

 

[Fishkiller]

Last all copper penny was in 1837, then it was a 95% copper until 1982. But copper wire is 99% copper and that should work?

 

[Coiled]

Fixed it. Rust not rush

Don't mind me, I'm just a pecker in the woods.

 

[popsgarland]

I'm out of here.

GOOD NIGHT EVERYBODY.

 

[msharley]

Are the pennies used as a scraper?

Yes...for the sharp corners where CHORE BOY can not "reach"

Gently, plenty of ATF...

 

[msharley]

The real question is where to find all copper pennies this day and age.

I have a jar....

If some one were in need, could mail them a couple...

 

[msharley]

Last all copper penny was in 1837, then it was a 95% copper until 1982. But copper wire is 99% copper and that should work?

Yes...but it is not as "stiff" as a penny...

The penny has a "lip" on the faces....can "drag" scale off...

Don't rush..you will be surprised at how easy it is..the more you soak..(and wiping down with an ATF patch counts)...the better it is..

 

[msharley]

Last all copper penny was in 1837, then it was a 95% copper until 1982. But copper wire is 99% copper and that should work?

Pre '82 penny.. The alloy is suitable for making it a bit stiffer than soft copper...

 

[Wudidiz]

Good mornin fellow gun toters and various ne'er do wells.

 

[Cool 'Horn Luke]

Good morning everyone!

 

[seeker_two]

Morning.....Monday's illegitimate sibling....

 

[Cooper]

Morning

 

[Byrd666]

Mornin'

 

[MountainGirl]

Morning

 

[Dawico]

Morning all

 

[AZ Refugee]

Mornin'