CZ P10

STXdevilsquid · Oct 22, 2017

Just picked up a P10 today, only one at the Corpus Saxet that I saw, it was Sunday so may have been more yesterday.

Initial thoughts. I love it so far, but just got it home. Not ready to carry it though. The slide moves smoothly. The trigger is awesome, better then my Glock and any other pistol I have. Compared it to my friends Glock 23 also, liked the CZ better, so did he. I love the way it shoots. Only put my first mag through it, just got home and let a few fly.

Ok, negatives. Holly smokes the mag release is killing me. It is really hard to load 15 into the mags, I had to use a loader. It seams like the tension from the mags loaded in the gun push back on the release and make it really hard to release the mag, not just stiff but almost undoable. With 14 in the mag it’s not as bad but still really hard. If I push up on the mag it’s better. I just sat here and cycled the mag and release for a lot of cycles and it seams to be getting better, but still way too hard. I hope it smoothes up. My thumb is numb right now. If anyone has any tips to help it out let me know please.

Sent from my iPhone using Tapatalk

Shuutr · Nov 1, 2017

Well, finally went for one.

GT told me the first time they get one here and there but usually gone shortly after and they offered to add me to a list. I declined. FF to yesterday, I stroll in as an afterthought before going to a movie. I handle it again and it feels a little more appealing.

Which is when the guy behind the counter tells me that they have one. Someone ordered one and decided against it. So I bought it.

TexasEric · Nov 19, 2017

I shot my stock M&P 2.0 and an p10c shot in alternating 5 shoot groups. Having never fired a cz in my life. It was markedly better in terms of accuracy, trigger, and I prefer it’s grip texture compared to the 2.0.

Ordered the suppressor ready version a couple of months ago, hoping for an early Christmas present.

Thegomezclan · Nov 19, 2017

TexasEric said:
I shot my stock M&P 2.0 and an p10c shot in alternating 5 shoot groups. Having never fired a cz in my life. It markedly in terms of accuracy, trigger, and I prefer it’s grip texture compared to the 2.0.

Ordered the suppressor ready version a couple of months ago, hoping for an early Christmas present.

That's funny, I shot both my CZ P10c and my new M&P9 compact 2.0 today also

TexasEric · Nov 19, 2017

Thegomezclan said:
That's funny, I shot both my CZ P10c and my new M&P9 compact 2.0 today also

How did younfeel about it. To me the cz p10 was a dramatically improved gun.

Thegomezclan · Nov 19, 2017

TexasEric said:
How did younfeel about it. To me the cz p10 was a dramatically improved gun.

the CZ was the better pistol in my opinion by far. Dont get me wrong the M&P9 2.0 is a good one too

STXdevilsquid · Nov 20, 2017

TexasEric said:
I shot my stock M&P 2.0 and an p10c shot in alternating 5 shoot groups. Having never fired a cz in my life. It was markedly better in terms of accuracy, trigger, and I prefer it’s grip texture compared to the 2.0.

Ordered the suppressor ready version a couple of months ago, hoping for an early Christmas present.

CZUSA told me threaded barrels and supressor ready should start shipping in November, so hopefully they start popping up soon.

The more i handle/shoot my P-10 the more i like it. CZ has 17 rounder mags too which are easier to load. I figured out the mag release issue, it’s gotten easier and with the slide locked bag they drop out, like they should.

Sent from my iPhone using Tapatalk

TexasEric · Nov 20, 2017

STXdevilsquid said:
CZUSA told me threaded barrels and supressor ready should start shipping in November, so hopefully they start popping up soon.

The more i handle/shoot my P-10 the more i like it. CZ has 17 rounder mags too which are easier to load. I figured out the mag release issue, it’s gotten easier and with the slide locked bag they drop out, like they should.

Sent from my iPhone using Tapatalk

I randomly saw this yesterday. It has known issues with the p10c, and fixes..for the most part. I found it interesting. It’s 14 mins and some change time wise.

STXdevilsquid · Nov 20, 2017

Good info

Churchmouse · Nov 26, 2017

I need to let a friend read all of this. He recently picked up a P-10 to add to his CZ collection. We are both fans of the Marque with more than a few and all have full on CGW packages installed and tuned. I am not a striker fired fan but he is. I have ran his P-10 and do like it a lot more than any Glock I have shot. He added a trigger upgrade recently and I have as yet to run it with that Modification.

Great info here.

Thegomezclan · Nov 26, 2017

I liked mine so much that I picked up another this weekend. Going to be putting my M&P compact 2.0 for sale.

TexasEric · Nov 26, 2017

Thegomezclan said:
I liked mine so much that I picked up another this weekend. Going to be putting my M&P compact 2.0 for sale.

Same thing here. I will use it to pay for part of the rifle suppressor I am buying.

orbitup · Nov 26, 2017

I put the HBI trigger on mine. It pinches my finger though so I'm going back to the original one.

Sent from my P00C using Tapatalk

RANDY_MARSH · Nov 29, 2017

If I see an FDE for under $450 I might pick it up. Unless I fall in love with my M&P 2.0 FDE 5 inch over the next range trip.

That hinged trigger is their only fault. If they'd go to a blade type safety, i'd love it.

TexasEric · Nov 29, 2017

RANDY_MARSH said:
If I see an FDE for under $450 I might pick it up. Unless I fall in love with my M&P 2.0 FDE 5 inch over the next range trip.

That hinged trigger is their only fault. If they'd go to a blade type safety, i'd love it.

Read the previous few pages. I have m&p 2.0 at home right now. The M&P looks great and is a GOOD gun, but the p10c is better. But the cz’s barrel and trigger are far superior, at least in my hands.

You would have have to drop an apex trigger and barrel to make the 2 about equal. That is hundreds of extra bucks just to bring the the M&P on par with the p10c.

Both handle recoil great and feel good in my hands. But when the shooting the advantages of the CZ will be apparent.

ZX9RCAM · Nov 29, 2017

What's the noticeable difference between the barrels?

TexasEric · Nov 29, 2017

3 parts.

1. From my own experience on my M&P 1.0. I sighted in a Viridian green laser that was dead balls accurate @ 7 yards for single shots. Also trained with iron sights. I could only get my groups to be so small. For a defensive shooting purpose the groups were fine, but I always try to improve.

2. I fired my new stock M&P 2.0 with a rented stock p10c. I shot in alternating 5 shot groups, for over 100 rounds. Having NEVER touched a cz before that day, my groups sizes were HALF the size of my new 2.0. @ 7 yards.

3. I was looking to get a threaded barrel, to improve accuracy host a suppressor. I found this Apex video. It totally made sense.
The first 3:45 explains it. The video is 10 mins and worth watching. The short story is that the dwell time on the M&P is too short causing accuracy issues.

Churchmouse · Dec 3, 2017

orbitup said:
I put the HBI trigger on mine. It pinches my finger though so I'm going back to the original one.

Sent from my P00C using Tapatalk

I have ran a friends with both the stock and after market trigger in it. I felt the stock trigger was the more irritating.
Interesting.

Thegomezclan · Dec 4, 2017

Picked up a third one this last weekend.

RANDY_MARSH · Dec 5, 2017

Thegomezclan said:
Picked up a third one this last weekend.

Man, where are you finding these things? I've yet to find one at a lgs

CZ P10

The #1 community for Gun Owners in Texas

Member Benefits:

Active Member

Active Member

Member

Well-Known

Member

Well-Known

Active Member

Member

Active Member

Active Member

Well-Known

Member

Sticker Cop

New Member

Member

Over the Rainbow bridge...

Member

Active Member

Well-Known

New Member

Forum statistics