Hornady Lock-N-Load AP
RCBS Lockout Die
Hornady M2 Tumbler
Hornady Loading Manual
2lbs Unique (plus almost empty 3rd bottle)
2lbs CFE Pistol
2lbs Hogdon H110
1000 CCI Large Pistol Primers
800 CCI Small Pistol Primers
4 SPP tubes
4 LPP tubes
500 Winchester Large Magnum Rifle Primers
500 .452 Xtreme Bullets
500 .451 Xtreme Bullets
~150 .357 (9mm) Xtreme Bullets
500 .451 Hornady XTP
200 .357 (9mm) Hornady XTP
200 10mm/.400 Hornady XTP
100 .452 Hornady XTP
15 MTM Cases (40/45)
10 MTM Cases (9mm)
Bullet extractor
Scale
Case Gauge
Primer Flipper Tray
Approx 1000-2000 pieces of brass, EACH:
9MM
45 LPP
.223/5.56 (mixed)
Possibly more I honestly have no idea
20+ akro bins w/wall mount brackets
A bunch of common spare sparts, springs, bushings(!), etc.
Every Caliber is setup for quick change. Dies mounted in bushings, PTX Powder Measure Stop, Shell plate for each. Just swap dies, shell plate, powder stop, and set the lockout die.
Full dies for 9mm / 45 ACP / 40 S&W/10mm
resize/decap/powder/flare/feed&seat/crimp
Each caliber also comes with a bullet feeder die. I'll include acrylic tubes that you fill with bullets, and they'll automatically feed the die and seat into your case.
Asking $1500 obo
will entertain trades... 300wm/308/338 lapua bolt guns... colt python... hell anything super cool.
Located N. Fort Worth near Eagle Mtn
Sent from my SIG Sauer
RCBS Lockout Die
Hornady M2 Tumbler
Hornady Loading Manual
2lbs Unique (plus almost empty 3rd bottle)
2lbs CFE Pistol
2lbs Hogdon H110
1000 CCI Large Pistol Primers
800 CCI Small Pistol Primers
4 SPP tubes
4 LPP tubes
500 Winchester Large Magnum Rifle Primers
500 .452 Xtreme Bullets
500 .451 Xtreme Bullets
~150 .357 (9mm) Xtreme Bullets
500 .451 Hornady XTP
200 .357 (9mm) Hornady XTP
200 10mm/.400 Hornady XTP
100 .452 Hornady XTP
15 MTM Cases (40/45)
10 MTM Cases (9mm)
Bullet extractor
Scale
Case Gauge
Primer Flipper Tray
Approx 1000-2000 pieces of brass, EACH:
9MM
45 LPP
.223/5.56 (mixed)
Possibly more I honestly have no idea
20+ akro bins w/wall mount brackets
A bunch of common spare sparts, springs, bushings(!), etc.
Every Caliber is setup for quick change. Dies mounted in bushings, PTX Powder Measure Stop, Shell plate for each. Just swap dies, shell plate, powder stop, and set the lockout die.
Full dies for 9mm / 45 ACP / 40 S&W/10mm
resize/decap/powder/flare/feed&seat/crimp
Each caliber also comes with a bullet feeder die. I'll include acrylic tubes that you fill with bullets, and they'll automatically feed the die and seat into your case.
Asking $1500 obo
will entertain trades... 300wm/308/338 lapua bolt guns... colt python... hell anything super cool.
Located N. Fort Worth near Eagle Mtn
Sent from my SIG Sauer
Last edited by a moderator: