22/45 trigger man in houston

[Sugar Land]

Is there anyone in Houston that has a lot of trigger experience. Looking to get a trigger job on one of my 22/45's. Does anyone know someone in Houston? I have not done enough of them to do it myself.

 

[poolingmyignorance]

Tac47 in spring. 5407 Louetta rd. Ask for Cliff.

 

[Sugar Land]

Thanks for the lead. I will call Cliff tomorrow.

 

[matefrio]

Darn, would have done a drop in kit for you if I was there.

https://www.volquartsen.com/products/354-accurizing-kit

 

[Sugar Land]

Rob I wish I was comfortable enough to put one of those in. Thanks.

 

[1slow01Z71]

The volquartsen kit is easy to put in. Theres a couple youtube videos that show you exactly how to do it. Well wprth the money and an hour of your time.

 

[Sugar Land]

I will look into it tomorrow thanks.

 

[AaronP220]

Let me have a crack at the gold slide one. I bet an hour or two with some careful massaging I can get some pretty good results.

 

[Sugar Land]

I am thinking the steel one and then take the old trigger and put it in the gold one

 

[AaronP220]

Which ever. I'm pretty sure I can get 2-3lbs off and it won't cost you anything.

 

[RACER X]

AARON did a great job on my kimber

sent from my cell phone, far far away but still monitored by the NSA

 

[Shorts]

Was looking at the parts kit for our 22/45 from Majestic Arms.

Speed Strip Kit

 

[speedracer]

was that cliff Williams at tac47 in spring?

 

[Sugar Land]

I called tac47 and Cliff was slammed.

 

[lonestardiver]

+1 on the Volq. drop in kit. Also look for Power Custom, they have one too... or used to.
Either one will do wonders... the target trigger will also help (got one on my MKII).

 

[checcles]

Just do it all yourself. Easy and less expensive. Don't buy the whole Volquartsen kit either.

I explain why on this page http://www.texasguntalk.com/forums/rimfire/51829-ruger-mkiii-22-45-mods-everyone-needs-do.html

 

[1slow01Z71]

Im coming to Houston the 23rd if you don't have it done by then I can help you out if you want to attempt the volquartsen parts. Its really not bad at all.

 

[Sugar Land]

Sounds great. I will try to hunt down the parts. Thanks

 

[Sugar Land]

I am getting ready to order the Volq Acc Kit. Should be in in a few days. PM sent 1slow01Z71..

 

[Sugar Land]

Does anyone know if I use a mark II hammer bushing in my mark III to get rid of mag safety?