AR vs. AR pistol?

[baboon]

It's pricey but I want the Noveske KX3.

I had a KX3 on my very first AR pistol & it showed a lot of erosion when I took it apart to clean. I like Smith Vortex type flash hiders.

 

[SQLGeek]

Interesting. Thanks for that.

 

[Charlie]

"It has the SBA brace on it, and my interpretation is that it can be shouldered."

That's what I've read also.

 

[oldag]

"It has the SBA brace on it, and my interpretation is that it can be shouldered."

That's what I've read also.

ATF letter on that somewhere out there.

 

[oldag]

I find AR pistols fun shooting in .223, 7.62x39 and .308.

Nice truck guns as well, easily stowed. Would be useful in close quarters if it hits the fan.

 

[CyberWolf]

I had a KX3 on my very first AR pistol & it showed a lot of erosion when I took it apart to clean..

^very interesting, would have thought they would hold up better...thanks for that info.

It's pricey but I want the Noveske KX3.

^^^You can find various cheaper versions that hold up well and look similar (if not as polished as a flaming pig).



I've actually got some extras that'll likely never get used, and figured might be good PIF opportunity...(Mods, feel free to remove/move this next part if needed)

Specifically, I've got two extras of the following (new/unused) (msrp ~$35):

http://www.rfssports.com/product.php?pid=177

You can have one free if you want it, if you're willing to 1. cover the cost of shipping, and 2. work with the Mods to somehow raffle off the other to an active forum member that could use it (assuming any interest in this, just no time to do it myself)...Just PM me if interested

 

[JColumbus]

Might I recommend something like these.

https://www.rainierarms.com/ferfrans-cqb-modular-muzzle-brake-system/

https://www.strikeindustries.com/shop/strike-industries-oppressor-combo.html

https://megiddotacticalgroup.com/product/surefire-warden-socom-kit-free-shipping/

I have all three and they are all equally effective. The Strikes and Ferfrans work with both company's muzzle devices. Not only do they minimize the concussion to the side, but as the shooter, you will also notice a difference, especially if you're indoor, or have a roof over you. Worth every penny in my opinion.

Cheaper options...

http://www.muzzlebrakeparts.com/9mm...-sound-forwarder-washer-ttn-c19-p2134709.html

https://www.kakindustry.com/kak-industry-flash-can

I've had the flash can and it worked fine as well. The only reason why I went with the top 3 is I LOVE showing friends the difference with them on and off and of course... They look cool as hell.

Have fun!

 

[twain55]

I find AR pistols fun shooting in .223, 7.62x39 and .308.

Nice truck guns as well, easily stowed. Would be useful in close quarters if it hits the fan.

Agreed. Mine is my truck gun.

Folks that do this just have to remember that it’s handgun and all applicable rules/laws apply.

 

[JColumbus]

Agreed. Mine is my truck gun.

Folks that do this just have to remember that it’s handgun and all applicable rules/laws apply.

Yep, sucks needing a chl to open carry an ar pistol.

 

[oldag]

Agreed. Mine is my truck gun.

Folks that do this just have to remember that it’s handgun and all applicable rules/laws apply.

Great reminder when traveling to other states.

 

[oldag]

Yep, sucks needing a chl to open carry an ar pistol.

Toyed with the idea of having a custom holster made, just to freak out the liberals.

 

[twain55]

Toyed with the idea of having a custom holster made, just to freak out the liberals.

I’ve seen those. I thought it was just a gag until I got an AR Pistol. Then I was like, “Ahhhh! Understood.”

 

[Charlie]

Toyed with the idea of having a custom holster made, just to freak out the liberals.

If you get a holster rig, get another AR pistol and have a "two gun" set up! I'm sure you'd get a lot of attention!

 

[SQLGeek]

^very interesting, would have thought they would hold up better...thanks for that info.






^^^You can find various cheaper versions that hold up well and look similar (if not as polished as a flaming pig).



I've actually got some extras that'll likely never get used, and figured might be good PIF opportunity...(Mods, feel free to remove/move this next part if needed)

Specifically, I've got two extras of the following (new/unused) (msrp ~$35):

http://www.rfssports.com/product.php?pid=177

You can have one free if you want it, if you're willing to 1. cover the cost of shipping, and 2. work with the Mods to somehow raffle off the other to an active forum member that could use it (assuming any interest in this, just no time to do it myself)...Just PM me if interested

View attachment 189391

Thank you for that offer however I'm looking at doing a 300 BLK build right now.

I'm sure someone can make good use of it and would be glad to take you up on your offer.

 

[CodyK]

If you get a holster rig, get another AR pistol and have a "two gun" set up! I'm sure you'd get a lot of attention!

Oh yeah! An old west holster with two AR pistols and 30 round Pmags all around it!


Sent from my iPhone using Tapatalk

 

[lightflyer1]

Might I recommend something like these.

https://www.rainierarms.com/ferfrans-cqb-modular-muzzle-brake-system/

https://www.strikeindustries.com/shop/strike-industries-oppressor-combo.html

https://megiddotacticalgroup.com/product/surefire-warden-socom-kit-free-shipping/

I have all three and they are all equally effective. The Strikes and Ferfrans work with both company's muzzle devices. Not only do they minimize the concussion to the side, but as the shooter, you will also notice a difference, especially if you're indoor, or have a roof over you. Worth every penny in my opinion.

Cheaper options...

http://www.muzzlebrakeparts.com/9mm...-sound-forwarder-washer-ttn-c19-p2134709.html

https://www.kakindustry.com/kak-industry-flash-can

I've had the flash can and it worked fine as well. The only reason why I went with the top 3 is I LOVE showing friends the difference with them on and off and of course... They look cool as hell.

Have fun!

I went with one of the cheaper options you posted. The muzzlebrakeparts for a .223/5.56. Adding this to my new AR15 pistol. This one:

http://www.muzzlebrakeparts.com/bla...m-nut-and-crush-washer-ttn-c156-p2134658.html

 

[CyberWolf]

Thank you for that offer however I'm looking at doing a 300 BLK build right now.

I'm sure someone can make good use of it and would be glad to take you up on your offer.

Cool, and yeah, offer is open if anyone else is interested...otherwise they'll just go back in the parts bin for another few years

 

[Dad_Roman]

I went with one of the cheaper options you posted.....

Yea, I like the looks of that. It will certainly get the job done.

 

[JColumbus]

Toyed with the idea of having a custom holster made, just to freak out the liberals.

Please record their faces for us.

 

[CodyK]

This is a PSA pistol lower with a Bear Creek 10.5” upper in 5.56. Tragically lost it in a boating accident soon after this pic.


Sent from my iPhone using Tapatalk