Brass Exchange

[hornetguy]

i have 500 NIB starline 357 mag brass. looking for 45colt

I have some .45 Colt, some of it is still loaded. None of it is new brass, but I think it's all in pretty good shape.... maybe 200 pieces? I'll have to count... if you are interested.

 

[usmcpmi]

I have some .45 Colt, some of it is still loaded. None of it is new brass, but I think it's all in pretty good shape.... maybe 200 pieces? I'll have to count... if you are interested.

If sarge passes on your .45 colt, I'd like it. I have new starling. 357 brass.
Thanks.
MG

Sent from my SM-A125U1 using Tapatalk

 

[hornetguy]

If sarge passes on your .45 colt, I'd like it. I have new starling. 357 brass.
Thanks.
MG

Sent from my SM-A125U1 using Tapatalk

Sounds good.... I'll get an inventory of what I have this afternoon, after work.
I might even have some commercial cast bullets left... I'll check.

 

[usmcpmi]

Ok! Just Don't let me step on sarge's toes...

Sent from my SM-A125U1 using Tapatalk

 

[hornetguy]

Well, I have just over 450 pieces of fired brass for the .45 Colt. Maybe 40 or so are still loaded.
Sarge, are you interested?

 

[sergeant69]

I have some .45 Colt, some of it is still loaded. None of it is new brass, but I think it's all in pretty good shape.... maybe 200 pieces? I'll have to count... if you are interested.

PM sent

 

[sergeant69]

If sarge passes on your .45 colt, I'd like it. I have new starling. 357 brass.
Thanks.
MG

Sent from my SM-A125U1 using Tapatalk

no sweat. u still interested in the 45 blanks and wax?

 

[usmcpmi]

Yes Sir...I'll be back in town at the end of this next week. I'll text you then.
MG

Sent from my SM-A125U1 using Tapatalk

 

[sergeant69]

Yes Sir...I'll be back in town at the end of this next week. I'll text you then.
MG

Sent from my SM-A125U1 using Tapatalk

good

 

[hornetguy]

Is there any interest in 22 K Hornet brass? I sold my Bullberry barreled TC carbine a few years back, and this has just been sitting around gathering dust....
I have a regular hornet, and have been debating whether to "K" this one, but haven't decided yet...

 

[Here4TheChix]

Demo Ranch (and all affiliates), hear my plea, assist us range-chickens (those who pluck brass at the range),
and donate brass to the less fortunate re-loaders.

I'll be going through my brass soon, and I know I have some .40 S&W I can swap, but it'll be a bit, gotta find which bin it's in since the move...

 

[michael.ed]

New guy here. Retired Nurse. Working at Lowes. Well past retirement age. I started reloading 9mm last March and really enjoy it. Considering reloading 32 H&R mag and/or .327 Federal Mag. Live in Sachse now after living in Bellevue (near Bowie) for over 20 years. Anybody doing any 32 reloading?

 

[sergeant69]

New guy here. Retired Nurse. Working at Lowes. Well past retirement age. I started reloading 9mm last March and really enjoy it. Considering reloading 32 H&R mag and/or .327 Federal Mag. Live in Sachse now after living in Bellevue (near Bowie) for over 20 years. Anybody doing any 32 reloading?

PM sent

 

[benenglish]

PM sent

PMs do not go through for people with only one post who have not bought any form of membership. Try again after he has 25 posts.

 

[sergeant69]

PMs do not go through for people with only one post who have not bought any form of membership. Try again after he has 25 posts.

oh crap. ok. thanks

 

[Coyote9]

New guy here. Retired Nurse. Working at Lowes. Well past retirement age. I started reloading 9mm last March and really enjoy it. Considering reloading 32 H&R mag and/or .327 Federal Mag. Live in Sachse now after living in Bellevue (near Bowie) for over 20 years. Anybody doing any 32 reloading?

I have a LOT of .32 lead cast wad cutter bullets I'd swap or sell...I have used them in 32 S&W in a Walther GSP and in a 92 Winchester 32-20- trade for 9mm bullets, 30 cal rifle bullets.
I'll count them, should be 3-500ish- fairly soft so not suitable for magnum powder loads, great for target shooting!

 

[michael.ed]

I have a LOT of .32 lead cast wad cutter bullets I'd swap or sell...I have used them in 32 S&W in a Walther GSP and in a 92 Winchester 32-20- trade for 9mm bullets, 30 cal rifle bullets.
I'll count them, should be 3-500ish- fairly soft so not suitable for magnum powder loads, great for target shooting!

Thanks for letting me know. Just now starting to think about a different caliber to reload. It’s between a .32 and the 40 S&W.

 

[Dennyntx]

I'd be interested in any pistol caliber brass you might have, except 40S&W.

Oh, and for you guys that already reload, I got some 30-06 and some 30-30 to trade. Just let me know.

You still have to 30-30 brass if so what pistol brass are you looking for

 

[sergeant69]

i have NIB .357 mag Starline brass i'd trade

 

[BuzzinSATX]

Thanks for letting me know. Just now starting to think about a different caliber to reload. It’s between a .32 and the 40 S&W.

I can help with .40 S&W if you need some. Just let me know. All I’d ask is postage which would probably be under $20