Target Sports

WTS CZ (or clone) SAO Single Action Trigger OEM takeoff (mailed)

The #1 community for Gun Owners in Texas

Member Benefits:

  • Fewer Ads!
  • Discuss all aspects of firearm ownership
  • Discuss anti-gun legislation
  • Buy, sell, and trade in the classified section
  • Chat with Local gun shops, ranges, trainers & other businesses
  • Discover free outdoor shooting areas
  • View up to date on firearm-related events
  • Share photos & video with other members
  • ...and so much more!
  • Lead Belly

    Well-Known
    Lifetime Member
    Rating - 100%
    8   0   0
    Jun 25, 2022
    1,596
    96
    Lake Conroe
    These OEM CZ flat triggers are hard aluminum(2024?) and are all that's needed to convert your pistola into a real shooter. I'm not fond of those super-curvy ones CZ uses and ordered a few of these.

    They fit some clones- such as Canik, which required enlarging top hole a tiny bit on the trigger as Canik used a slightly larger pin for some reason.

    Brings the pull weight down and shortens the pretravel and reset. Has post-travel adjustment screw, i suggest drop of loctite when you are happy- reset is your guide there.

    Many videos out there, here is one. Need some basic tools: good punch, roll of duct tape to support. toothpick(slave pin) & hemostat (needle-nose) helps with trigger return spring.
    This is a DIY job if you can do basic work with tools, else gunsmith can install.

    You don't need to modify pistol itself or remove any other parts. You can easily convert back to stock.

    $40 delivered, with allen key. Zelle works fine. Not for striker or plastic CZ's.
    Works in these models with safety:
    - CZ 97B, 75, 75B, 85, 85B, SP-01, SP-01, P-01, Compact, Shadow, Shadow 2, Tactical Sports, Tactical Sports Orange, TS 2, Czechmate, Parrot - pistols with manual SAFETY.



    sao1.jpeg
     
    Top Bottom