Well looking to sell my complete Noveske AR-15 w/ mid-length gas system, NSR handguard, and Vortex optics to fund another firearm purchase. This rifle has only been fired 60 rds of Federal XM855 to zero the BUIS. The Vortex Sparc w/ magnifier is brand new and only mounted to the rifle. I would preferably like to sell as a complete rifle with optics, but willing to part out as listed below. I am located in the Dallas/Fort Worth area.
Complete Rifle w/ optics- $1850
Complete Upper w/ optics - $1450
Complete Lower w/ stock - $475
Prices are for FTF transactions but willing to ship FFL to FFL for actual cost. Please feel free to PM me with any interest or questions. Below are some specific details
Factory Noveske AR-15 Rogue Hunter Upper w/ BCG & Charging Handle and Magpul Gen2 BUIS
"This Noveske Rogue Hunter Complete AR-15 Upper Assembly is chambered in 5.56mm and comes fully assembled and ready to drop onto any standard AR-15 lower receiver. It comes equipped with one of Noveske's legendary stainless steel match barrels featuring their exclusive 5.56 Match Mod 0 chamber for outstanding accuracy with both 5.56x45mm NATO and 223 Remington ammunition. This barrel is turned down to a lightweight contour for faster handling, and is outfitted with improved polygonal 1 in 7" twist rifling, M4 feed ramps, 1/2"-28 muzzle threads and a non-glare, bead-blasted finish. Additional features include a Noveske-marked BCM Gunfighter charging handle, a pinned low profile gas block, an A2 flash hider and a shot-peened, MP-tested bolt housed within a Mil-Spec bolt carrier. The upper's mid length gas system is another beneficial upgrade that produces a smoother recoil impulse upon firing than that of a carbine length system.
This Rogue Hunter upper includes a 13.5" long Noveske NSR-13.5 handguard with the proprietary KeyMod rail system and, with an outside diameter of only 1.48" (without accessories attached), it is one of the slimmest, lightest, customizable handguards available for the AR-15 platform. The NSR free floats the barrel for greater accuracy potential and provides a full length, continuous top rail for the addition of optics and/or accessories (additional add-on rail sections sold separately). KeyMod accessories are quick and easy to install along the handguard's length, and don't require that the NSR be removed from the upper in order to attach or detach them. All KeyMod system accessories use captured backing plates that are inserted into an unused key-slot hole and then tightened into place via an allen wrench, eliminating the tedious and frustrating procedure of fishing separate backer plates down the interior of a handguard and securing them with loose fasteners like most competing modular forearm designs."
Noveske GEN 2 Complete Lower
-Noveske Gen2 Chainsaw lower "cosmetic blemish only"
-Flared magwell for speed reloads
-Flared forged lower uses standard take-down and fire control pins
-Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum.
-PSA Lower Parts Kit
-QD endplate for quick QD sling attachment
-Mil-spec buffer, 6-position buffer tube, and spring
-Magpul STR Stock
Vortex SPARC 2MOA Red Dot and 3x Magnifier w/ long eye relief
-Brand new, never used only mounted
-Stardard Vortex SPARC mount included
-Flip-to-side magnifier mount included
-Comes with everything as if bought new
Complete Rifle w/ optics- $1850
Complete Upper w/ optics - $1450
Complete Lower w/ stock - $475
Prices are for FTF transactions but willing to ship FFL to FFL for actual cost. Please feel free to PM me with any interest or questions. Below are some specific details
Factory Noveske AR-15 Rogue Hunter Upper w/ BCG & Charging Handle and Magpul Gen2 BUIS
"This Noveske Rogue Hunter Complete AR-15 Upper Assembly is chambered in 5.56mm and comes fully assembled and ready to drop onto any standard AR-15 lower receiver. It comes equipped with one of Noveske's legendary stainless steel match barrels featuring their exclusive 5.56 Match Mod 0 chamber for outstanding accuracy with both 5.56x45mm NATO and 223 Remington ammunition. This barrel is turned down to a lightweight contour for faster handling, and is outfitted with improved polygonal 1 in 7" twist rifling, M4 feed ramps, 1/2"-28 muzzle threads and a non-glare, bead-blasted finish. Additional features include a Noveske-marked BCM Gunfighter charging handle, a pinned low profile gas block, an A2 flash hider and a shot-peened, MP-tested bolt housed within a Mil-Spec bolt carrier. The upper's mid length gas system is another beneficial upgrade that produces a smoother recoil impulse upon firing than that of a carbine length system.
This Rogue Hunter upper includes a 13.5" long Noveske NSR-13.5 handguard with the proprietary KeyMod rail system and, with an outside diameter of only 1.48" (without accessories attached), it is one of the slimmest, lightest, customizable handguards available for the AR-15 platform. The NSR free floats the barrel for greater accuracy potential and provides a full length, continuous top rail for the addition of optics and/or accessories (additional add-on rail sections sold separately). KeyMod accessories are quick and easy to install along the handguard's length, and don't require that the NSR be removed from the upper in order to attach or detach them. All KeyMod system accessories use captured backing plates that are inserted into an unused key-slot hole and then tightened into place via an allen wrench, eliminating the tedious and frustrating procedure of fishing separate backer plates down the interior of a handguard and securing them with loose fasteners like most competing modular forearm designs."
Noveske GEN 2 Complete Lower
-Noveske Gen2 Chainsaw lower "cosmetic blemish only"
-Flared magwell for speed reloads
-Flared forged lower uses standard take-down and fire control pins
-Receiver is mil-spec hard coat anodized aircraft grade 7075 T6 aluminum.
-PSA Lower Parts Kit
-QD endplate for quick QD sling attachment
-Mil-spec buffer, 6-position buffer tube, and spring
-Magpul STR Stock
Vortex SPARC 2MOA Red Dot and 3x Magnifier w/ long eye relief
-Brand new, never used only mounted
-Stardard Vortex SPARC mount included
-Flip-to-side magnifier mount included
-Comes with everything as if bought new
