My next build - a creedmore

[Kobiash1]

Can I use a noveski upper and lower , what I've used on my previous 556 and 300 black out builds , for this application ? Any any recommendations for a barrel. I'm looking for a top of the line barrel. I build them slowly so I can go for better parts. Also is there any online "DIY" guides for the Creedmore.
Thanksj
Jerry from the republic of Tejas

 

[Younggun]

Assuming you mean 6.5 CM.

If so, they are built on AR10 receivers. AR15 parts aren’t going to work. You might consider a Grendel build if you want to uses what you have.


Sent from my iPhone using Tapatalk

 

[Sam7sf]

No, you need an ar10 lower.

 

[Dad_Roman]

What they said^^^^^^^

Your entering a whole new world.

 

[Dawico]

Yep, AR10 size lower and upper.

*Creedmoor

 

[Big Green]

Aero Precision is a good candidate for an upper and lower set. Watch for sales and should be able to find them for about $225 for the set.

 

[Dawico]

Also, buy your upper and lower together and be sure the parts you want to use are compatible.

Ar10s are not all the same unlike AR15s.

Make sure you do some research before sourcing your parts.

 

[sucker76]

I have a 6.5CM built on an Aero upper/lower. It's important to get at least the Aero takedown and hinge pins. They are slightly longer to work with the wider shape.