Need help with dent

[Skip]

Someone at WM hit my van. I'm hoping someone here has the tools and skills to pop this out, and I can get the paint fixed later. I'm hoping suction will work. Thanks, Skip

Sent from my SM-G900V using Tapatalk

 

[rp-]

Picture?

 

[rman]

are there creases?

get a heat gun from harbor freight and a couple cans of compressed air.

heat the dent, and around it, well.
then use compressed air, upside down, and blast it.

Basically how PDR works. vids on youtube

Sent from my Nokia 5160 using Snake

 

[Skip]

Sorry, I have alot on my plate right now.
Here's the picture.

Sent from my SM-G900V using Tapatalk

 

[Skip]

Sent from my SM-G900V using Tapatalk

 

[rp-]

Maybe try what rman is saying. Best I could do would be to tap it from the backside but the crease would never line up correctly.

 

[Skip]

Any idea how much a heat gun runs?

Sent from my SM-G900V using Tapatalk

 

[rp-]

20-30. If you're around my area I can let you borrow mine for a 6 pack if good beer

 

[Whistler]

I have a stud gun but it's a long way from you, almost to Texarkana.

 

[Skip]

I appreciate the ideas guys. I'll give it a shot. I'm still not working so I've been using the van to run UBER. The riders can
knock down my rating by complaining about damage. Thank you for the idea.

Sent from my SM-G900V using Tapatalk

 

[rp-]

What kind of work can you do?

 

[orbitup]

Suction cups and heat guns won't help you. It's going to take 3 or 4 hours of body time and paint.

 

[rp-]

Feel the Bern?

 

[rman]

if you do plan to bring it in, I have a few good shops in San Antonio i can refer you to.

A heat gun and compressed air would probably pop about 70% of that dent out though. Paint will probably start to chip and flake

Sent from my Nokia 5160 using Snake

 

[Skip]

Feel the Bern?

I don't get it....lol

Sent from my SM-G900V using Tapatalk

 

[rp-]

Suction cups and heat guns won't help you. It's going to take 3 or 4 hours of body time and paint.

I don't get it....lol

Sent from my SM-G900V using Tapatalk

It sounded like he was up selling a little. Bad joke I suppose.

 

[mroper]

You can buy one of those suction cups at harbor freight too. They run less then 5 bucks
http://www.harborfreight.com/catalogsearch/result?q=suction+cup

 

[rp-]

His dent is over a bend in the metal. Suction cups don't do so well around edges like that