Figured I would go ahead and start this build thread. Picking up everything over the next month or so. Will post pictures and write up as parts come in.
Rifle:
10/22
Purpose and goals:
A lightweight and hyper accurate small game/ farm utility rifle, with a primary focus on lightness.
Stock:
Hogue overmold, .920 barrel channel, OD Green
Receiver:
Stock ruger
Bolt:
Stock unit for now, Kidd coming later
http://www.coolguyguns.com/10-22-bolt_p_25.html
Trigger:
Kidd drop in unit
http://www.coolguyguns.com/Ruger-10-22-trigger-job-kit_p_95.html
Barrel:
Kidd lightweight 16" fluted and threaded, black finish
http://www.coolguyguns.com/Ultra-Lightweight-Ruger-10-22-Barrel_p_138.html
After doing some research, I decided to go with this due to reports on kidd having the best accuracy, price point, it isn't TOO lightweight, and the steel face where the bolt contacts won't get damaged or marred over time like an aluminum lightweight barrel would.
Optics base:
You guessed it, Kidd, black finish, but the stock Ruger will do for now.
http://www.coolguyguns.com/Scope-Base-for-KIDD-10-22-Receiver-_p_99.html
Optic:
Still up in the air, will definately be a 1-4 to save on weight, this has my consideration:
https://www.primaryarms.com/Bushnell-AR223-1-4X24-Riflescope-w-BDC-Reticle-T-p/ar91424.htm
These are the big components so far, there are a few smaller unamed parts, like bolt buffer and other pins and such. I will be ordering the barrel this friday. My goal is to have this done by my bday. What y'all think? Comments?
Sent from my SPH-L720 using Tapatalk 2
Rifle:
10/22
Purpose and goals:
A lightweight and hyper accurate small game/ farm utility rifle, with a primary focus on lightness.
Stock:
Hogue overmold, .920 barrel channel, OD Green
Receiver:
Stock ruger
Bolt:
Stock unit for now, Kidd coming later
http://www.coolguyguns.com/10-22-bolt_p_25.html
Trigger:
Kidd drop in unit
http://www.coolguyguns.com/Ruger-10-22-trigger-job-kit_p_95.html
Barrel:
Kidd lightweight 16" fluted and threaded, black finish
http://www.coolguyguns.com/Ultra-Lightweight-Ruger-10-22-Barrel_p_138.html
After doing some research, I decided to go with this due to reports on kidd having the best accuracy, price point, it isn't TOO lightweight, and the steel face where the bolt contacts won't get damaged or marred over time like an aluminum lightweight barrel would.
Optics base:
You guessed it, Kidd, black finish, but the stock Ruger will do for now.
http://www.coolguyguns.com/Scope-Base-for-KIDD-10-22-Receiver-_p_99.html
Optic:
Still up in the air, will definately be a 1-4 to save on weight, this has my consideration:
https://www.primaryarms.com/Bushnell-AR223-1-4X24-Riflescope-w-BDC-Reticle-T-p/ar91424.htm
These are the big components so far, there are a few smaller unamed parts, like bolt buffer and other pins and such. I will be ordering the barrel this friday. My goal is to have this done by my bday. What y'all think? Comments?
Sent from my SPH-L720 using Tapatalk 2
Last edited: