Separate names with a comma.
Discussion in 'Rifles' started by Skip, Dec 22, 2009.
for an AR-15, black, and honestly mostly for range shooting. :icon_popcorn:
I would get a Daniel Defense XV, my buddy had their M4 and it was awesome, but you can get the XV for that price and I'm thinking about selling the RRA and making up the difference if there is any to get it. http://shop.peachstateguns.com/product.sc?productId=652&categoryId=133 Thanks to Mate for posting that link originally.
I would build the stag arms model 3 (I have just over 700 in my build) and then spend the left over on ammo. What good is a gun you dont know hot to use :fighting0002:
An M&P15(f?) the flat top with the flip up rear sights.
Hey now! LOL!
How about $1,100 and you can throw down on that Spike's w/ the Adams Arms piston conversion :happy0001:
I'd probably go to PK, buy a complete lower for $305, and one of the complete 16" uppers for between 500 and 670 (for the 458 socom :tongueout. Then go to DSG Arms and buy their MOE furniture kit (stock, pistol grip, handguard, and buffer tube stuff) for $100. Sell off the extra buffer tube assembly and buy some pmags and a set of magpul's iron sights (if you don't already have an optic for the rifle) or a used detachable carry handle. Then you've got a little left over for some ammo.
Charles Daly CD-M4LE
Off the top of my head, this is what I've got stashed in my parts box:
DPMS Stripped Lower
Unknown A3 Upper w/Dust Cover and Forward Assist
Couple of Bolt Carriers
Couple of Bolt Assemblies
Several Barrel Nuts/Delta Rings/Springs/Forend Caps
Several A2 Front Sight/Gas Blocks
Couple of Removable Carry Handles
Jard 1.5# Trigger
Several Mil-Spec Triggers/Hammers/Springs
Several Safety Assemblies
Several Magazine Release Assembles
Several Bolt Hold Open Assemblies
Unknown 16” 1 in 9” M4 Profile Barrel
A1 Flash Suppressor
YHM Diamond Rifle Length 4 Rail Free Float Tube
UTG Mid Length 4 Rail Free Float Tube
A2 Pistol Grip
DPMS Palm Rest Pistol Grip
Choate Benchrest Stock
Low Profile Gas Block
Carbine Gas Tube
Mid Length Gas Tube
Rifle Length Gas Tube
Burris 30mm 1 Piece Cantilever Scope Mount
Larue M68 QD 30mm Aimpoint Mount
Misc Springs, Detents, Roll Pins, etc.
I've got an AR project I'm cooking up and I'm not sure which way to go with it, but most of these parts would still be left over and I'm sure I'll want to start selling them off pretty soon...
Quite a list, but I wouldn't have a clue on building one. And I am waiting for that ammo I am selling, to sell.
Lowers are very easy to put together. if you go to www.rangersales.com and click on the pdf document at the top of the page, it walks you through it step my step, and what tools you will need. i used a 5/32 pin punch, a lfatblade jeweler's screwdriver to push down the springs and pins for the takedown and pivot pins, and you too can put it together yourself.