Volquartzen makes a great kit. Majestic arms makes a great kit called the 3.2 quick strip kit that I would also recommend. Try the speed strip kit with the mark ii style bushing first. It really cleaned up my trigger. With the vq parts- you get what you pay for and you'll have an amazing gun.Just shot my 22/45 lite and the trigger just felt all wrong. It wasn't heavy just didn't like the length of pull. It has way too much play. Anyone else have this problem?
Well shit, I guess it's only money.The whole point of this thread is to say that you don't need all of that, just the sear.
Awesome looking 22/45. Brownells has 3packs of the mag bumpers. My dad needs them because he never seats mags all the way without them. I've done it before too. They're cheap and they keep you shooting.Well shit, I guess it's only money.
Bought the kit annd a Volquartsen mag plate.
Now for the install and test.
It's heavy and quiet. It works better on my 22/45 and p22 than my 10/22. I used super colibri and cci AR Tactical. The pistols made the cci that's labeled at 1200fps subsonic. So I assume any ammo rated under 1200 will be subsonic with the spectre ii in a barrel less than 5". On the 10/22 the cci was supersonic and had a crack. Still quiet but less spectacular.How do you like the Spectre ii? I still need an NFA trust, but I think that's my next purchase for mine.
Misfeeds or miseject. Does it do it on the first round out of the mag or the whole time? Could be a lube problem. Mine likes to run a little wet.
Is the magazine seating properly?
sent from an idgit coffeeholic[/QUOTE
Misfeeds...it ejects usually well, teh first few cartridges shoot okay, then it jams or misfeeds, when I open it up,
the cartridge is laying in the feed area...or it its in the mag and wont set up for the loader to push it in...gets a bit frustrating ...
I have a accurize kit coming soon for it..as well as some williams sights...I am new to this for the most part, so forgive the questions and lack of
knowledge...
Misfeeds or miseject. Does it do it on the first round out of the mag or the whole time? Could be a lube problem. Mine likes to run a little wet.
Is the magazine seating properly?
sent from an idgit coffeeholic[/QUOTE
Misfeeds...it ejects usually well, teh first few cartridges shoot okay, then it jams or misfeeds, when I open it up,
the cartridge is laying in the feed area...or it its in the mag and wont set up for the loader to push it in...gets a bit frustrating ...
I have a accurize kit coming soon for it..as well as some williams sights...I am new to this for the most part, so forgive the questions and lack of
knowledge...
Check the breach face of the barrel for damage.