Titan Armament Certified AR15 Armorers course TGT Discount

[jonpac07]

Hello Everyone,

I am going to offer a discount for all Texas Gun Talk Members for any of our AR15 Certified Armorers Courses starting on December 1st. The course fee will be $75 a student for any Texas Gun Talk member, LE or MIL.

Our armorers course is a two day 16 hr comprehensive tour of the AR15 platform. Upon completion of this course you will have the knowledge and skills necessary to properly assemble, disassemble, re-barrel an AR15 as well as perform routine inspections and maintenance. You will also know the fundamentals of the platform such as the cycle of operation and lifespan of components.

Here are some more topics that we cover in our AR15 Certified Armorers Course:

-History of the platform
-Definition of Mil-Spec/TDP
-Anatomy of the platform
-Anatomy and importance of a barrel
-Rifle tuning
-Maintenance
-Materials &Finishes
-Common Misconceptions
-Q&A session
-Comparison of commercial components vs True Mil-spec
-Muzzle devices
-Aftermarket accessories
and much much more.

I have been in the industry since 2010 and I am a Certified Armorer for the AR15 and have been taught by:
Will Larson- Semper Paratus Arms. Former Armorer for BCM, Blackwater and may other Private security companies
Joey Boswell - founder of War Sport Industries
George Huang- founder of Battle Arms Development
Anibal Salinas- Weapon Armament Research, creator of the Super Woody
Jayden Jung- VG6 precision
John Hwang- Rainier Arms
Roger Wang- Forward controls design

Our Armorers program is sponsored by:
Aero Precision
Vg6 Precision
Ballistic Advantage
Trijicon
B.E. Meyers
Kns Precision
B5 Systems
Forward Controls Design
Hexmag

What you will need:
an AR15
or
all components necessary to assemble a full rifle during the course.


-Complete set of flat steel punches (Starrett Pin Punch set recommended)
1/16, 5/64, 3/32, 1/8, 5/32
-Complete set of roll pin holders (starter punches)
-Complete set of roll pin punches
-1″ Nylon and Brass Gunsmithing Hammer
-Small to medium pair of needle nose pliers.
-Large flat tip screwdriver or variable tip screwdriver set.
-Bolt Catch Pin Punch- http://www.brownells.com/gunsmith-to...prod26484.aspx
-Pivot Pin Installation Tool- http://www.brownells.com/gunsmith-to...prod26488.aspx
Minimalist Tool List (From Brownells.com)

Glock Disassembly Tool
Nylon and Brass gun smithing hammer. (1″) Part# 818-600-100WB
6″ flat tip screwdriver or correct allen wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Notepad/Paper
USB Flash Drive


Reservations must be made @
http://weaponanatomy.mysimplestore.com
before the date of the course.
If anyone has any questions you can reach me at: titanarmamentcorporation@gmail.com
The course calendar will be updated weekly
Thank you.

 

[jeepinbanditrider]

So it starts on the 1st? Interested in the next one for sure just need to find out where it's at and date so I can put in for time off for the course. Is this a widely accepted certification?

 

[jeepinbanditrider]

Ok found your course schedule and see the 16th and 17th but don't see how to sign up for that one. I see you ran one on oct 28th at Eagle Gun Range. But don't see a signup for the next one.


Sent from my iPhone using Tapatalk

 

[jonpac07]

Sorry for the trouble, I'm updating the website now!

 

[jeepinbanditrider]

I put in for days off on the 16th and 17th to attend the course. Just need to sign up when the website gets up to date.

 

[jonpac07]

Cool, It's ready for you now. Looking forward to it!

 

[jonpac07]

TGT MEMBERS DISCOUNT CODE IS: TGT16

 

[jeepinbanditrider]

I got this message when buying the course on the 16-17

[FONT]Coupon code usage limit exceeded

[/FONT]

 

[Lost Spurs]

0n*jom
Lul
77 binnin 9



Sent from my SM-N920V using Tapatalk

 

[jonpac07]

I fixed it, I apologize still getting used to the system.

 

[jeepinbanditrider]

Registered for the course on the 16-17. Messed up my email address and put my old Marine Corps email in there.

Should be
Joshua.d.downs

At


Gmail


Sent from my iPhone using Tapatalk

 

[jonpac07]

Got it! Thanks, see you then!

 

[jeepinbanditrider]

Are we going to need an armorer's wrench or a vice block?

 

[jonpac07]

no

 

[jeepinbanditrider]

Jon sorry for the million questions. A guy at work is trying to get the day off on Saturday the 17th. His shift starts at 5pm, and he's trying to get me to take it. When does the class end? Would I have time to get from the class location to Lewisville before 5pm?

Thanks again,
Josh

 

[sanch109]

What's the location of these courses? What city?

 

[jeepinbanditrider]

So I signed up for this course last year. It never happened and Jon said he would reschedule for January. When Feb 2017 rolled around and I had still not received info on rescheduling the class I had already paid for I requested to be refunded as I didn't see the class materializing anytime soon.

Jon originally got back to be quickly and explained that he had been "banned from paypal" and either I would have to dispute the transaction on PP or he could send me a check. I didn't want to mess his paypal up anymore so I agreed to have a check sent to me..........which never showed up. Jon apologized that he had forgot to send it and said he was recently diagnosed with a form of Lukemia.

I get people run into issues. That e-mail saying he would send me the refund plus a digital copy of the armorer's course info on April 2nd of this year was the last bit of communication I had from him or any other reps from "Titan Armament". Their FB page is still up and the website is gone so I assume they have gone under and I'll never see that money again. Oh well.

But I would suggest that if you somehow come across this company I'd go the other way. It wasn't a lot of money but it was 2 or 3 tanks of gas in my car and to me it's the principle of the matter.

 

[jeepinbanditrider]

Update. A rep finally got back in touch with me and refunded my money.