What have you done to your vehicle lately?

[Leper]

I put a wire back in the connector for the o2 sensor that got pulled out last night when the exhaust shifted. I had the exhaust loose so I could get a better angle on the axle I needed to pull. I needed to pull the axle out to replace the cv boot that tore after I installed the lift. Are you seeing a pattern here?

 

[FrEaK_aCcIdEnT]

Put 3M Crystalline CR90 tint across the whole windshield. A strip of 5% 3M Color Stable across the top of the windshield. 35% 3M Color Stable on the driver and passenger doors. Then 5% 3M Color Stable one the rear doors and rear glass. It feels much better when I climb in after work.

Also made the marker lights the daytime running lights with switchback LED bulbs. Now I have sequential blinkers in the front as well.

Youtube of what the DRL mod looks like. (Not my Colorado)




Also put some redline hood struts on. Much better than the factory hood prop.

 

[Wiked]

Thanks guys, and yea I'm doing it at the house. The limited space sucks but since I don't have to drive anywhere I can do a bit at a time.

 

[TheDan]

This weekend has been productive... Renewed the government approval for the Abarth. Installed a new mid-pipe on the RX8, plus changed the air filter and oil. Autozone had a decent deal; buy a 5qt jug of Mobile1 for $36 and get a Bosch premium filter for free.

 

[Rangel]

Did a pan drop and filter change on trans, differential fluid change on my wife's yukon.

Switched my truck to synthetic oil.

Need to get hers aligned and new tires soon.

 

[TheCytochromeC]

Check in time ladies~!

I've changed the thermostat, a corroding brake booster line and got a boost leak from an old throttle pipe coupler.

I fixed the coupler lol

 

[Saltyag2010]

I changed the radiator, thermostat, thermostat housing, water pump and seal, cams, head gaskets, coil packs, spark plugs, and had the heads sent to a machine shop and rebuilt locally. It's been in the shop for a month.

 

[Mexican_Hippie]

Fumoto oil drain plug valve.

 

[Charlie]

Fumoto oil drain plug valve.

Pics, or it didn't happen!

 

[Mexican_Hippie]

Pics, or it didn't happen!

Bam!

 

[grasshopperglock]

Bam!

Where's the carb on that thing?

 

[Charlie]

Change your oil pretty often, do ya'?

 

[Mexican_Hippie]

Nope, but I don't like a mess. My old plug washer didn't seal good and had a slow drip so I figured I'd upgrade.

 

[Mexican_Hippie]

Where's the carb on that thing?

I don't understand your question ;-)

 

[Charlie]

Where did you get the valve?

 

[Mexican_Hippie]

Amazon
http://www.amazon.com/gp/aw/d/B003V...oto+f+111n&dpPl=1&dpID=41aflhKGLhL&ref=plSrch

 

[Charlie]

Thanks!

 

[ZX9RCAM]

I was driving home from work Thursday, & my brake pedal went all the way to the floor.

I dropped it off on the way home, & had it fixed Friday.

 

[grasshopperglock]

I get to pull my right side exhaust manifold. Let's just say there's a rattle caused by my own doing. To fix it, Its gotta be removed.


It's an easy job besides gasket clean up.

 

[Recoil45]

I replace an axle seal on my truck. I was really lazy and only did the side that was actually leaking.