Brass Exchange

[Army 1911]

I’m looking for 10MM brass. I have .38spl, .357 mag, .40 S&W, .45 ACP, and .223 for trade.

Trade ratio is negotiable. Consider this a standing offer…thanks!

10 mm brass is hiding with the 10mm socket.

 

[BuzzinSATX]

10 mm brass is hiding with the 10mm socket.

I guess that was supposed to be funny. I also guess I’m too dumb to get the joke…care to enlighten me and show me how smart you are?

 

[rp-]

I guess that was supposed to be funny. I also guess I’m too dumb to get the joke…care to enlighten me and show me how smart you are?

10mm sockets are notorious for getting lost

Sent from my SM-G991U using Tapatalk

 

[deemus]

I’ve bought 10 or more in my lifetime.

Tell us you don’t mechanic much, without telling us you don’t mechanic much.

 

[Gordo]

Anything missing, is always suspected to be with 10mm sockets.
JB Cooper jumped with a 10mm socket in his pocket, and he hasn't been seen sense.
Hunter Biden's laptop had a saved image of a 10mm socket, and we will never see it again.

But, I am a wrench turner, and have NEVER lost a 10mm socket.
I'm not kidding.
I did loose a nice Snap-On ratchet in '84, and it may have had a 12mm socket on it at the time, but not sure.

If you are ever out walking, and find a 10mm socket, DON'T pick it up!
You will go missing...

 

[BuzzinSATX]

I’ve bought 10 or more in my lifetime.

Tell us you don’t mechanic much, without telling us you don’t mechanic much.

I don’t mechanic much these days, but when I do, I use one or more magnetic trays and everything smaller than a 3/8 ratchet (nuts, bolts, sockets, etc.) goes in it when not in use. Been doing that for many years.

I do that because I have lost stuff and wasted hours looking for or buying a replacement “widget”. I just never heard that 10MM sockets were somehow more prone to being lost than 7/16 or whatever.

Sorry I missed the reference. Appreciate the enlightenment.

 

[sb47]

I’m looking for 10MM brass. I have .38spl, .357 mag, .40 S&W, .45 ACP, and .223 for trade.

Trade ratio is negotiable. Consider this a standing offer…thanks!

That .357 sounds like something I would like to have but I got's nuttin to trade. Could meat in a few months when I visit my nephew in Bandera. How mant .357's ya got and what ya want fer'em and are they first fired?

 

[BuzzinSATX]

That .357 sounds like something I would like to have but I got's nuttin to trade. Could meat in a few months when I visit my nephew in Bandera. How mant .357's ya got and what ya want fer'em and are they first fired?

I cannot say how many times the .357 or .38 brass has been fired. I bought a box of reloading stuff from a buddy and this was his uncle’s. The uncle was an engineer and left lots of notes. I doubt he loaded anything hot.

I went through it all and it looked fine. I ran all the brass through the tumbler and it’s in solid shape.

 

[Austinpilot69]

I’ve got lots of 45acp 38spl and 40sw. Looking to move it to someone who can use it. I reload for 30+ calibers so I’m not going to list everything but I’ll always take more 10mm, 270, 7mm mag, 300prc and most military surplus calibers. I have probably 500 38spl and 40sw, 8k+ 45acp.


Sent from my iPhone using Tapatalk

 

[BuzzinSATX]

That .357 sounds like something I would like to have but I got's nuttin to trade. Could meat in a few months when I visit my nephew in Bandera. How mant .357's ya got and what ya want fer'em and are they first fired?

Sorry, I missed the part about how much.

PM sent

 

[Austinpilot69]

Forgot to add - I also have about 500+ 30-06


Sent from my iPhone using Tapatalk

 

[gemihur]

Ya'll are great!
I shoot wildcat calibers.
Needing 307 Win brass to form 7mmJDJ#2
Lemme know what limb you'd like!

 

[benenglish]

Sorry, I missed the part about how much.

Lemme know what limb you'd like!

This is the brass exchange thread.

Theoretically, people just mail this stuff to each other without payment. I know sales have been set up here and no one is going to get terribly bent out of shape about it.

Nevertheless, if you want to buy or sell brass it should be listed in the classifieds.

 

[gemihur]

I'd like to trade some brass
I was kidding about the limb needed.
I understand the premise of trade only
I've got lots of 357 mag ( 250 pcs)and a good bit of 30-06 (120 pcs)
Looking for some 307 Win
Can also use 356 Win for same
I'm forming a freaky JDJ cartridge
Thanks, guys

 

[gemihur]

Ben,
I know how you love contenders
Imagine that you can actually shoot 7-08 as long as you handload and use Ackley improvements with a semi-rimmed case!
Hence the 7mm Super Bower aka 7mm JDJ#2 or 7x307AI
Don Bower and JDJones built the same cartridge

 

[benenglish]

I know how you love contenders

Funny man...

Imagine that you can actually shoot 7-08 as long as you handload and use Ackley improvements with a semi-rimmed case!

I always found the .307 intriguing as the basis for a single shot rifle or pistol. Never acted on any thoughts but it's an interesting use. I'm glad someone is keeping the flame lit for that case.

 

[BuzzinSATX]

This is the brass exchange thread.

Theoretically, people just mail this stuff to each other without payment. I know sales have been set up here and no one is going to get terribly bent out of shape about it.

Nevertheless, if you want to buy or sell brass it should be listed in the classifieds.

Thanks…and before I saw this, I’d sent a PM to the poster offering that. Probably used poor wording.

Awaiting his response.

 

[gemihur]

Don Bowers article:

http://www.retro.co.za/gundex/articles/Ultimate%20(Thompson%20Contender)%20pistol%20accuracy.pdf

Thanks

 

[Brassguy]

Anyone reload .222 Rem Magnum? I bought a batch of once fired .222 brass and there were a handful of .222 mag brass mixed in. Free to anyone who wants them before I toss them. Email me at Myles.tenbroeck@gmail.com

 

[benenglish]

Anyone reload .222 Rem Magnum?

No, but I form it to 7x47, an absolutely wonderful pistol cartridge. Email inbound in a couple of minutes.