Needing a shotgun reblued

[Tonyt915]

Bought a 1970 Remington 1100 28ga. SKEET that was as neglected but the price was right. Found a replacement forearm to discard the cracked one, but next I would like to barrel/receiver/mag tube refinished. I know it hurts collector value but I’m. It looking to sell it.

 

[Wiliamr]

Depending on who does it... It is going to run you around 600 dollars.....

 

[Nicholst55]

Briley does refinishing here in Houston, but they're not inexpensive.

 

[CharlieWH2O]

Shotgun Gunsmithing (Gunsmithing) | Briley

Premium Shotgun Gunsmithing Gunsmithing which are manufactured to be the best in market with the highest quality shotgun, firearm, and rifle standards. Shop now for Shotgun Gunsmithing at Briley, A Legacy of Shooting Innovation

www.brileygunsmithing.com

These are the folks I would use. Take it in for a consult.

 

[Huntsman52]

Thr reciver shows has some slite rust pitting. That will have to buffed out or media blasted then rebuffed. If you do not mind a more matted bluing a slow rust blue would look nice. Easy to do yourself if you have time. I have used Mark Lee's Express Rust blue in the past with great results.

 

[Lonesome Dove]

It's not an expensive gun. The wood refinish alone would run approx. $400 and the recoil pad is very poorly fit that's another $100
With the stamped checkering it's not worth a $500 bill. The fake gold inlays will run a few hundred atop of the bluing work. I'd say $12-$1400 complete easy.