Dillon SDB ? 357 mag
- Thread starter vmax
- Start date
The #1 community for Gun Owners in Texas
Member Benefits:
Fewer Ads! Discuss all aspects of firearm ownership Discuss anti-gun legislation Buy, sell, and trade in the classified section Chat with Local gun shops, ranges, trainers & other businesses Discover free outdoor shooting areas View up to date on firearm-related events Share photos & video with other members ...and so much more!
Member Benefits:
It's been a while since I had one but it appears you just turn all the dies down about .135" except the sizing die. It should be down all the way for both rounds.
Like most sets the dies are the same for both rounds.
Spacers would actually go for swapping the other way since the dies need to be higher for 38 Special. The issue is you need to unscrew the dies to add them and I always just adjust the dies since there is fine tuning to be done anyways.
You could remove the powder dump and measure the height of the dies to save some time later if desired.
Like most sets the dies are the same for both rounds.
Spacers would actually go for swapping the other way since the dies need to be higher for 38 Special. The issue is you need to unscrew the dies to add them and I always just adjust the dies since there is fine tuning to be done anyways.
You could remove the powder dump and measure the height of the dies to save some time later if desired.
