Fake Suppressor

[newtoguns]

Hey guys. I'm new here and have a ton to learn. So many interesting topics. I searched, but couldn't find anything about my question. I have a Wiselite Sterling 9mm and want to put one of their fake suppressors on it. Their website shows the fake suppressors, however, they are out of stock and can't give me a date when they will produce more.

My question is.....I have a friend who can machine one for me. I know it's a fake, but is that ok or illegal? Don't need any troubles.

Thanks.

 

[Glockster69]

It's fake, & legal.

There's a thread where a guy was making / selling them (I think he was in CA), some of the more discriminating members bought and seemed happy with them.

 

[grumper]

Be careful how your friend constructs it.

If it can be made to fit on a firearm and it has any hollow spaces the ATF will consider it a real suppressor.

Those ATI MP5 .22lr clones ran into that issue and owners had to turn in their fakes in a mass recall.

 

[majormadmax]

Be careful how your friend constructs it.

If it can be made to fit on a firearm and it has any hollow spaces the ATF will consider it a real suppressor.

Those ATI MP5 .22lr clones ran into that issue and owners had to turn in their fakes in a mass recall.

Yep, was just about to post the same info. Actually, it was the GSG-5SD that had the fake suppressor issue; and 13,000 of them were recalled/replaced. Here is the letter sent out...

To all retail customers:

On January 2010 American Tactical Imports Inc received official notification from the Bureau of Alcohol, Tobacco, Firearms and explosives that the original barrel shroud (aka: fake suppressor) supplied with your GSG 5 SD model must be replaced. It has been determined that this shroud is regulated under the National Firearms Act. American Tactical will provide a replacement shroud at no charge for each GSG 5 SD model sold or currently in inventory.

Consumers in possession of a GSG 5 SD model with the original shroud in place on the firearm are now in violation of the NFA. To avoid continued violation of the NFA, ATI asks that all persons in possession obtain a replacement shroud as soon as possible. We anticipate arrival of the new shrouds to begin by the middle of February 2010.

IMPORTANT: THE ORIGINAL SD MODEL SHROUD MUST BE RETURNED ACOMPANIED BY THE FIREARM SERIAL NUMBER BEFORE A REPLACEMENT SHROUD IS ISSUED. THE DIAMETER OF THE SD SHROUD IS 1-9/16”. DO NOT RETURN THE SMALLER CARBINE SHROUD.

WHAT TO DO:

If possible return your old shroud to the dealer where purchased and show him this notice. The shroud will be returned to ATI along with a list of serial numbers from the guns that the shrouds were removed. ATI will send replacements to the dealer for pick up at your convenience; ATI will be sending replacements as fast as logistics allow. If your dealer is out of business or difficult to reach, or you purchased your gun used, from a consumer, return the shroud directly by US mail or UPS to American Tactical Imports Inc. 100 Airpark Drive Rochester, NY 14624.

PLEASE TRY NOT TO CALL US. We will provide comprehensive information on our web site American Tactical Imports , and AR15.Com - Your Firearm Resource. (AR-15, AR-10, M4 Carbine, M16, H&K, SIG, FNH, FAL, AK-47, 50 Cal, M1/M1A, Handgun, Pistol, Training, Hunting, and More!) or by e-mail to atiexchange@americantactical.us

REMEMBER, INCLUDE THE FIREARM SERIAL NUMBER WITH EACH SHROUD OR A REPLACEMENT WILL NOT BE ISSUED.

This action IS NOT being instituted through any fault and is strictly due to NFA compliance. American Tactical will assume the responsibility to satisfy the requirements in an effort to minimize the impact on our customers and protect your investment.

We at American Tactical Imports Inc. sincerely apologize for any inconvenience caused by this unfortunate situation.

Sincerely,
Anthony DiChario
President C.E.O.

And remember we're talking about a barrel shroud here, not a faux suppressor. It was simply a suppressor-looking device that slid over the barrel, not an extension. How the ATF determined it reduced the dB level is beyond me, they were solid aluminum with no baffles!

Anyone with a GSG-5SD that want to check to see if their rifle has had its shroud replaced can check it on ATI's website here: GSG-5SD Shroud Recall Serial Number Lookup

Cheers! M2

 

[BigBoss0311]

any reason you wont get a real one?

 

[newtoguns]

Yep, was just about to post the same info. Actually, it was the GSG-5SD that had the fake suppressor issue; and 13,000 of them were recalled/replaced. Here is the letter sent out...



And remember we're talking about a barrel shroud here, not a faux suppressor. It was simply a suppressor-looking device that slid over the barrel, not an extension. How the ATF determined it reduced the dB level is beyond me, they were solid aluminum with no baffles!

Anyone with a GSG-5SD that want to check to see if their rifle has had its shroud replaced can check it on ATI's website here: GSG-5SD Shroud Recall Serial Number Lookup

Cheers! M2

Thanks for the responses. I better wait (and hope) Wiselite starts making them again. Once again.....thanks to all.