Medium blueWhat color was the loctite?
Did not try soldering iron but did use a heat gun 1100 degrees did nothingLoctite is releasing when heated. While I cannot recommend a gun smith, I can recommend using a soldering iron on the tip of the catch.
There is a lot of metal at a buffer catch. Your going to have to let that heat gun ride there for several minutes to get that heat down in there to loosen the loctite.Did not try soldering iron but did use a heat gun 1100 degrees did nothing
Pot of boiling water may be just the ticket. Good idea.There is a lot of metal at a buffer catch. Your going to have to let that heat gun ride there for several minutes to get that heat down in there to loosen the loctite.
Soldering iron will inject that heat directly onto the problem area without affecting the surrounding area too much.
Pot of boiling water...
.
Pot of boiling water may be just the ticket. Good idea.
The heat gun deff got the heat in there the pen oil I had sitting on top was boiling and the whole reciever was to hott to touch so I dont think that's a problemThere is a lot of metal at a buffer catch. Your going to have to let that heat gun ride there for several minutes to get that heat down in there to loosen the loctite.
Soldering iron will inject that heat directly onto the problem area without affecting the surrounding area too much.
Pot of boiling water...
.
I tried this last night after about an hour it came loose and I cleaned it out so happy its felt with I'm like I got so much money tied up in this build and it my first one I'm glad it did not completely fail thanks for the tipsWill it move at all?
Is there room to push it down more?
Just thinking if it will move at all you can work it up and down and eventually break it free.
Take a punch and try to tap it back and forth too. Anything to get it moving.
Glad you got it out.I tried this last night after about an hour it came loose and I cleaned it out so happy its felt with I'm like I got so much money tied up in this build and it my first one I'm glad it did not completely fail thanks for the tips