Trust = $500
Tax Stamp = $200 SBR + $200 Suppressor
Engraving SBR = $75
AAC 762-SD Mod 08 = $800
AAC Mount = $75
I could be off $150 give or take. You don't need to be spooky or a pro to have fun.
Thank you for visiting ATF's Website. As stated on our site, generally,
we do not answer technical questions via e-mail, but I contacted our
Firearms Technology Branch (FTB) and was advised the following:
"If you manufacture the firearm yourself (cut off the barrel), no
additional markings other than the original markings are required. If a
Class III manufacturer cuts the barrel, the weapon must be marked by the
license holder. The serial number would remain the same in both
instances."
If you have any further questions, please call them on 304-260-1700.
Regards,
-----Original Message-----
From: craig xxxxx[mailto:nunyabiz@yahoo.com]
Sent: Monday, September 18, 2006 6:52 PM
To: EPS Directorate
Subject: required markings for sbr
sirs,
please advise me of any required markings or engravings for my uzi short
bbl rifle, approved march 30, 2006.
i flled out the required info on the form 1 that was approved. this
weapon is registered under my llc, and am hearing conflicting info
regarding any additional makings or engravings required. of course i
wish to remain in compliance.
thank you
craig xxxxxxxxx
owner
cs interprises llc
Is it worth it? I think so. It is like eating a lays poato chip . . . you don't stop at just one.
Now, the 762SD is $875.00
the 762SD N-6 is 1050.
51 tooth mounts are $100 for the F/H and $150 for the brake.
Trust is $450.00 from me.
Is it worth it to have the ultimate suppressed pimpstick? Hell yes it is!