Remington 700 bolt for a friend. Bought a spin index and tail stock to use on the milling machine. I did end up using a brass bore saver between the tail stock and the bolt to preserve the firing pin hole. I turned down a piece of Delrin stock as an arbor and threaded it 1/2X13 to fit the bolt shroud. It came out presentable enough for the freebie job I did as he allowed me to use his bolt to learn on... Going to do a couple of mine for practice setting up the equipment and experimenting with different sizes...the lines are straight, the lighting make them appear not to be..but are........
Last edited: