Packing for range trip?What the heck am I doing up?????
Packing for range trip?What the heck am I doing up?????
What he said......Morning all...
Packing for range trip?
Make her stand at parade rest? Or the position of attention if you’re being ballsy.
And then dismiss her when you’re done.
What’s the worst that could happen?
Actually its just the heat and UV that do it, obviously electric arcs have both, but there are other ways too.In an electric arc it turns to phosgene gas.
Thank you very much! Almost any of you can make a one of a kind silver bracelet for less $$$ than you'd think. I can link you to the silver supplier for a piece of silver flat wire (6" to 7" is all you need at a cost of about $30, this was 10mm×2mm). For the example below, you'd need a ball peen hammer, a flat file or some sandpaper, a homemade bending jig (mines a 2x6 piece of wood with some 1" PVC screwed to it to bend the radius) and some metal polish and elbow grease to shine it up. The bracelet below was my first ever attempt, turned out nice in my humble opinion. My current girlfriend is independently wealthy, I'm a working class pipeliner...she can buy anything she wants, but one off jewelry is priceless if they appreciate your efforts. I "assembled" these ear rings for her as well, $20 worth of silver and black Swarovski crystals, not nearly as unique, but they took under a minute to assemble.Very nice!
Something you could try if you have not.Thank you very much! Almost any of you can make a one of a kind silver bracelet for less $$$ than you'd think. I can link you to the silver supplier for a piece of silver flat wire (6" to 7" is all you need at a cost of about $30, this was 10mm×2mm). For the example below, you'd need a ball peen hammer, a flat file or some sandpaper, a homemade bending jig (mines a 2x6 piece of wood with some 1" PVC screwed to it to bend the radius) and some metal polish and elbow grease to shine it up. The bracelet below was my first ever attempt, turned out nice in my humble opinion. My current girlfriend is independently wealthy, I'm a working class pipeliner...she can buy anything she wants, but one off jewelry is priceless if they appreciate your efforts. I "assembled" these ear rings for her as well, $20 worth of silver and black Swarovski crystals, not nearly as unique, but they took under a minute to assemble.
View attachment 191736 View attachment 191737
Sent from my SM-G960U using Tapatalk
Bought this yesterday. https://www.tractorsupply.com/tsc/product/t-fence-post-puller
$46 well spent. Zipped them out of the ground like they were nothing. I've used ad-hoc solutions like a jack and pipe wrench and this makes the job just that much simpler.
Very nice!Something you could try if you have not.
Tandy Leather has several different shaders that might work better than a ball peen hammer. A pear shader will give you a similar but different peened look. View attachment 191740
Sent by an idjit coffeeholic from my SM-G892A using Tapatalk