Pay it Forward - Free Items, Free Karma

[hoytinak]

We've all seen these on other forums, lets see how it goes with a bunch of friendly Texans.

The Rules: You offer something you don't use anymore up for some good karma. You ship what you offered on your dime. You must claim an item and you must pay it forward in the same post. Don't claim the items using PMs but do the address exchanges using PMs. Now go do some cleaning and see what all you have laying around.

I'll start with:

1) great condition rubber Hogue grips for GP100
2) new metal 2 mag clamp for AR mags
3) factory 3 white dot sights for XD9
4) new Benchmade Model 5 rescue hook

that should work to get things started as I've got more cleaning to do.

 

[SSam]

Pay it forward...

I was interested in:
2) new metal 2 mag clamp for AR mags

I am a little confused with the "pay it forward" part though. I have seen items on other forums offered as karma but have not heard of the pay it forward part. I don't really have anything to offer in trade as my collection of stuff is rather small.

Thanks,
Sam

 

[Texas1911]

I was interested in:
2) new metal 2 mag clamp for AR mags

I am a little confused with the "pay it forward" part though. I have seen items on other forums offered as karma but have not heard of the pay it forward part. I don't really have anything to offer in trade as my collection of stuff is rather small.

Thanks,
Sam

You could always put up something else you don't use. I think we all have something we don't use, firearms related or not, or a service.

 

[Texas1911]

I have about ~75 spent brass casings in .45 Auto for any of the reloaders out there. All factory brass.

 

[hoytinak]

SSam,

PM me your mailing address and the mag clamp will be in the mail Monday. In the mean time, get to cleaning.

 

[idleprocess]

I have...
1) a malfunctioning 10rd double-stack 7.62x39 AK magazine - consistently fails to feed on the ... seventh? ... round. 'Been a while since I last used it.
2) a malfunctioning 8rd P220 magazine (Thanks, Promag!) - fails to feed on the 2nd/3rd round
3) 114rds of Monarch 55gr JSP .223 ammunition (will not cycle in my AR - possibly not in yours, either)
4) some 7.62x39 stripper clips (five?)
5) a stock AR pistol grip
6) a commercial AR 6-position telestock / buffer tube / buffer

Possibly interested in the .45ACP brass, but it's going to be a while until I get around to loading calibers other than .223, so I'm at the back of that line...

 

[TexasT/A]

I have...
1) a malfunctioning 10rd double-stack 7.62x39 AK magazine - consistently fails to feed on the ... seventh? ... round. 'Been a while since I last used it.
2) a malfunctioning 8rd P220 magazine (Thanks, Promag!) - fails to feed on the 2nd/3rd round
3) 114rds of Monarch 55gr JSP .223 ammunition (will not cycle in my AR - possibly not in yours, either)
4) some 7.62x39 stripper clips (five?)
5) a stock AR pistol grip
6) a commercial AR 6-position telestock / buffer tube / buffer

Possibly interested in the .45ACP brass, but it's going to be a while until I get around to loading calibers other than .223, so I'm at the back of that line...

I wouldn't recommend anybody run that monarch ammo through an AR. I've had too many problems with it. Probably be fine in a mini 14 or something though.

And I may be interested in that p220 mag if nobody else takes it. I need to see what I can dig up to pay it forward though.

 

[SSam]

SSam,

PM me your mailing address and the mag clamp will be in the mail Monday. In the mean time, get to cleaning.

I tried to email ya and your email is disabled on the forum. Shoot me an email and I will get you my address.

Thanks again,
Sam

 

[SIG_Fiend]

I too would be interested in the P220 mag.

Here's what I have to pay it forward:

1) Federal bulk pack 500rd .22lr high velocity 40gr
2) CCI Mini-Mag ~75rd (slightly used 100rd pack) .22lr High Velocity 36gr hollowpoints
3) Winchester White Box 50rd box .380acp 95gr FMJ
4) Brand new unopened Bore Snake, .40, .41 caliber
5) Sprinco recoil reduction guide rod for Sig P220
6) Sprinco recoil reduction guide rod for Sig P225/P6
7) Corbon 20rd box 9mm JHP +P, 90gr 1500fps @ 450lb/ft
8) Federal Hydra-Shok 20rd box 9mm JHP +P, 135gr 1050fps @ 330lb/ft
9) LPA adjustable target rear sight for Walther P99/Smith & Wesson SW99 (fits both)

 

[Texas1911]

The bore snake would also work with 10mm.

 

[dtalley]

Idleprocess,

I will take #6 - Commerical AR 6 position telestock / buffer tube / buffer (I was unable to email you, my email is dtalley59@yahoo.com)

I will pay it forward with:
RCBS 6mm trim die
Lee Safety Scale
Rubber Grips for S&W 59/5906 (maybe Pachmayr but I can't remember)

I'll look around for some more stuff

 

[carney]

I've got a couple of things someone could take off my hands,

2 Stock AR pistol grips
A2 Ar buttstock with buttplate and stock sling swivel(no buffer tube, or mounting screw etc)
Stock AR trigger kit (no pins)
Tasco Scope rings, brand new unknown size or model package says (Copyright 1976 however once opened you can tell they are brand new)

 

[carney]

I'll take the bore snake if no one else has jumped on it.

 

[carney]

Couple more things that I could ship all to one person or whoever wants it.

Copper Cleaning Brush for Caliber's (appear to be new)
1. 8mm/338
2. 30 cal (X2)
3. 6mm
4. 35 cal
5. 270 cal/ 7mm
6. 22 cal
7. and a whole bunch of other used/unpackaged ones and what appears to be some 12 guage mops

 

[713832281]

i dont have much but i got a mossberg synthetic stock that came off a 20 gauge, and a couple of gun lock cable things.

 

[The Kicker Guy]

I'll take the Monarch .223, it feeds in my AR and HK fiend, if you have the 9mm, .380, and .22lr I'll take it.

I have:

1 box of .357sig win. home protection - Texas1911
2 - USP9 HK mags 10rd - Austin Cowart
1 Hogue Colt Commander Grips
1 Maverick 88 factory synthetic buttstock
1 Hogue grip panels for Taurus PT92
1 box Winchester Dynapoint .22 magnum - pending
2 boxes of 20ga dove load - pending
.....more to come



If anyone needs any baby stuff, let me know, I have tons.

 

[Texas1911]

I'll take the .357 Sig.

I still have .45 Auto and some 8mm Mauser brass remaining.

 

[Austin Cowart]

PIF

PM sent on the corbon and federal ammo ill PIF with

XD gear mag holder
sig P228 factory grips.

Cheers
Austin

 

[Longtooths]

I too would be interested in the P220 mag.

Here's what I have to pay it forward:

1) Federal bulk pack 500rd .22lr high velocity 40gr
2) CCI Mini-Mag ~75rd (slightly used 100rd pack) .22lr High Velocity 36gr hollowpoints
3) Winchester White Box 50rd box .380acp 95gr FMJ
4) Brand new unopened Bore Snake, .40, .41 caliber
5) Sprinco recoil reduction guide rod for Sig P220
6) Sprinco recoil reduction guide rod for Sig P225/P6
7) Corbon 20rd box 9mm JHP +P, 90gr 1500fps @ 450lb/ft
8) Federal Hydra-Shok 20rd box 9mm JHP +P, 135gr 1050fps @ 330lb/ft
9) LPA adjustable target rear sight for Walther P99/Smith & Wesson SW99 (fits both)

Shoot I wouldn't mind 3,7 & 8 but would appreciate you letting me pay for shipping.

I need to go through my plethera of holsters that didn't work out and odds and ends gun parts and get them up here.

 

[SIG_Fiend]

Sorry guys, someone is already taking all of my ammo. The only things I have left are a Sprinco Sig P220 recoil reducer, and Walther P99/ S&W SW99 LPA adjustable rear target sight.