Working up a load for plinking in a CZ SP-01. Materials to be used are RMR 124 grain thickly plated round nose, mixed brass, and Ramshot Silhouette powder. Did a push test for OAL and it seems 1.145 is ideal. This would also work out of my M&P 9mm. Looked up load data and Ramshot shows with that OAL of 1.145 using Silhouette, the closest is 124gr REM GS from 5 grains to max of 5.9 grains. I've read that RAMSHOT data is conservative and people usually load a little higher than max. Here is my test loads:
5.0 grains and 5.2 grains
Anyone have any input or experience with this load/setup? Please keep in mind this is for a CZ so usually OAL is shorter than most.
5.0 grains and 5.2 grains
Anyone have any input or experience with this load/setup? Please keep in mind this is for a CZ so usually OAL is shorter than most.
