I wanted to stipple a small portion of the frame on my Glock 19. My goal was to keep it functional, and not go overboard. So, I did a very small amount of stippling in an area where I personally needed it. I used some cheap-o soldering iron I picked up for ~$15 from Lowes.
First, I taped off the area I wanted to stipple; I wanted to make sure it was relatively symmetrical.
Second, I stippled it and then took the tape off. Done.
First, I taped off the area I wanted to stipple; I wanted to make sure it was relatively symmetrical.
Second, I stippled it and then took the tape off. Done.