Hello Everyone,
I am going to offer a discount for all Texas Gun Talk Members for any of our AR15 Certified Armorers Courses starting on December 1st. The course fee will be $75 a student for any Texas Gun Talk member, LE or MIL.
Our armorers course is a two day 16 hr comprehensive tour of the AR15 platform. Upon completion of this course you will have the knowledge and skills necessary to properly assemble, disassemble, re-barrel an AR15 as well as perform routine inspections and maintenance. You will also know the fundamentals of the platform such as the cycle of operation and lifespan of components.
Here are some more topics that we cover in our AR15 Certified Armorers Course:
-History of the platform
-Definition of Mil-Spec/TDP
-Anatomy of the platform
-Anatomy and importance of a barrel
-Rifle tuning
-Maintenance
-Materials &Finishes
-Common Misconceptions
-Q&A session
-Comparison of commercial components vs True Mil-spec
-Muzzle devices
-Aftermarket accessories
and much much more.
I have been in the industry since 2010 and I am a Certified Armorer for the AR15 and have been taught by:
Will Larson- Semper Paratus Arms. Former Armorer for BCM, Blackwater and may other Private security companies
Joey Boswell - founder of War Sport Industries
George Huang- founder of Battle Arms Development
Anibal Salinas- Weapon Armament Research, creator of the Super Woody
Jayden Jung- VG6 precision
John Hwang- Rainier Arms
Roger Wang- Forward controls design
Our Armorers program is sponsored by:
Aero Precision
Vg6 Precision
Ballistic Advantage
Trijicon
B.E. Meyers
Kns Precision
B5 Systems
Forward Controls Design
Hexmag
What you will need:
an AR15
or
all components necessary to assemble a full rifle during the course.
-Complete set of flat steel punches (Starrett Pin Punch set recommended)
1/16, 5/64, 3/32, 1/8, 5/32
-Complete set of roll pin holders (starter punches)
-Complete set of roll pin punches
-1″ Nylon and Brass Gunsmithing Hammer
-Small to medium pair of needle nose pliers.
-Large flat tip screwdriver or variable tip screwdriver set.
-Bolt Catch Pin Punch- http://www.brownells.com/gunsmith-to...prod26484.aspx
-Pivot Pin Installation Tool- http://www.brownells.com/gunsmith-to...prod26488.aspx
Minimalist Tool List (From Brownells.com)
Glock Disassembly Tool
Nylon and Brass gun smithing hammer. (1″) Part# 818-600-100WB
6″ flat tip screwdriver or correct allen wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Notepad/Paper
USB Flash Drive
Reservations must be made @
http://weaponanatomy.mysimplestore.com
before the date of the course.
If anyone has any questions you can reach me at: titanarmamentcorporation@gmail.com
The course calendar will be updated weekly
Thank you.
I am going to offer a discount for all Texas Gun Talk Members for any of our AR15 Certified Armorers Courses starting on December 1st. The course fee will be $75 a student for any Texas Gun Talk member, LE or MIL.
Our armorers course is a two day 16 hr comprehensive tour of the AR15 platform. Upon completion of this course you will have the knowledge and skills necessary to properly assemble, disassemble, re-barrel an AR15 as well as perform routine inspections and maintenance. You will also know the fundamentals of the platform such as the cycle of operation and lifespan of components.
Here are some more topics that we cover in our AR15 Certified Armorers Course:
-History of the platform
-Definition of Mil-Spec/TDP
-Anatomy of the platform
-Anatomy and importance of a barrel
-Rifle tuning
-Maintenance
-Materials &Finishes
-Common Misconceptions
-Q&A session
-Comparison of commercial components vs True Mil-spec
-Muzzle devices
-Aftermarket accessories
and much much more.
I have been in the industry since 2010 and I am a Certified Armorer for the AR15 and have been taught by:
Will Larson- Semper Paratus Arms. Former Armorer for BCM, Blackwater and may other Private security companies
Joey Boswell - founder of War Sport Industries
George Huang- founder of Battle Arms Development
Anibal Salinas- Weapon Armament Research, creator of the Super Woody
Jayden Jung- VG6 precision
John Hwang- Rainier Arms
Roger Wang- Forward controls design
Our Armorers program is sponsored by:
Aero Precision
Vg6 Precision
Ballistic Advantage
Trijicon
B.E. Meyers
Kns Precision
B5 Systems
Forward Controls Design
Hexmag
What you will need:
an AR15
or
all components necessary to assemble a full rifle during the course.
-Complete set of flat steel punches (Starrett Pin Punch set recommended)
1/16, 5/64, 3/32, 1/8, 5/32
-Complete set of roll pin holders (starter punches)
-Complete set of roll pin punches
-1″ Nylon and Brass Gunsmithing Hammer
-Small to medium pair of needle nose pliers.
-Large flat tip screwdriver or variable tip screwdriver set.
-Bolt Catch Pin Punch- http://www.brownells.com/gunsmith-to...prod26484.aspx
-Pivot Pin Installation Tool- http://www.brownells.com/gunsmith-to...prod26488.aspx
Minimalist Tool List (From Brownells.com)
Glock Disassembly Tool
Nylon and Brass gun smithing hammer. (1″) Part# 818-600-100WB
6″ flat tip screwdriver or correct allen wrench for pistol grip screw
Pivot pin installation tool- Part# 080-216-011WB
1/16 flat punch (Starrett is recommended)
Notepad/Paper
USB Flash Drive
Reservations must be made @
http://weaponanatomy.mysimplestore.com
before the date of the course.
If anyone has any questions you can reach me at: titanarmamentcorporation@gmail.com
The course calendar will be updated weekly
Thank you.