What gun stuff did you buy today?

[RedArmy]

Trigger for the M&P 15-22 project came in today, got a good deal on it from PSA. Now if only it would warm up a little so I can spray Cerakote and media blast. I have a heater in the shed but still don't like to spray at low temps plus I need to media blast quite a few parts which I only like to do outside.

I went with the flat faced trigger.

 

[studenygreg]

Trigger for the M&P 15-22 project came in today, got a good deal on it from PSA. Now if only it would warm up a little so I can spray Cerakote and media blast. I have a heater in the shed but still don't like to spray at low temps plus I need to media blast quite a few parts which I only like to do outside.

I went with the flat faced trigger.

Have you had any issues with a light trigger setting off rimfire rounds? I may need one for my 15-22

Sent from my SM-G991U using Tapatalk

 

[deemus]

Have you had any issues with a light trigger setting off rimfire rounds? I may need one for my 15-22

Sent from my SM-G991U using Tapatalk

Have that issue on an AR I own. I use benchrest primers on loads for that rifle. It is a sweet trigger, but it won't fire NATO rounds.

Can't do that with a 22 though.

 

[RedArmy]

Have you had any issues with a light trigger setting off rimfire rounds? I may need one for my 15-22

Sent from my SM-G991U using Tapatalk

I haven't even started on this project yet so I'm about to find out. When I was researching triggers for the M&P 15-22 I found that the CMC trigger was the most popular selection. No one has reported any issues using it in the 15-22 that I could find. CMC also makes the extended trigger pins you need to install it so I think they know it works fine. At one time they sold a specific kit for the 15-22 that came with the pins and the trigger but now they just say any small pin trigger will work along with their wide pin kit. I might start a thread on this build in the rimfire section when I get started. I'll report back at any rate on how it ends up shooting and if I have any problems.

 

[studenygreg]

I haven't even started on this project yet so I'm about to find out. When I was researching triggers for the M&P 15-22 I found that the CMC trigger was the most popular selection. No one has reported any issues using it in the 15-22 that I could find. CMC also makes the extended trigger pins you need to install it so I think they know it works fine. At one time they sold a specific kit for the 15-22 that came with the pins and the trigger but now they just say any small pin trigger will work along with their wide pin kit. I might start a thread on this build in the rimfire section when I get started. I'll report back at any rate on how it ends up shooting and if I have any problems.

Yes, please start a thread.

Sent from my SM-G991U using Tapatalk

 

[RedArmy]

Yes, please start a thread.

Sent from my SM-G991U using Tapatalk

Will do, I've been holding off due to the cold weather since I'll be spraying Cerakote. I think it should be warmer by the weekend.

 

[Tonyt915]

Picked up some optics, didn’t need them but they made a deal that was too good to pass if I bought both. New in box and never mounted. Really just wanted the SRO for a PCC build

 

[PinnedandRecessed]

Picked up some optics, didn’t need them but they made a deal that was too good to pass if I bought both. New in box and never mounted. Really just wanted the SRO for a PCC build

What do you want for the magnifier?

 

[Glenn B]

Placed an order for 1,000 rds of PMC Bronze 9mm FMJ 115 grain ammo yesterday. Shame on me, I folllowed a link from another gun forum and did not price check except via ammo seek. Sorry now that I did not also look directly at TargetSportsUSA.com because I paid $254.99 plus tax, free shipping, and I could have had several other run of the mm ammo brand for about $15 less (plus tax). For Instance Winchester and Remington UMC 9mm, 115 gr, FMJ ammo going for $23.91 (ammo club price) per box of 100 rds., plus tax, free shipping. Would have preferred checking as I usually do and saving almost $16.00. Oh well, wake up calls come in all shapes, colors and dimensions often at unexpected times.

 

[Tonyt915]

What do you want for the magnifier?

View attachment 428832

Not sure what I’m going to do with it yet. I have a g33, so I’ll compare them and get rid of whichever I don’t like.

 

[PinnedandRecessed]

Late night internet shopping:
Maglula MP5 loader
HK MI claw mount
HK A2 stock and MKE mags - OOF!
HK German MP5 mags - Double OOOF!

 

[zackmars]

Timney mp5 trigger and a tan mp5 mag

And some repro ww2 German mp40 mag pouches. Trying to do a thing

 

[blueangel64]

Got some more boo-lots!!

 

[studenygreg]

Holosun scrs, picatinny mount.
These are for my 10/22 takedown

Sent from my SM-G991U using Tapatalk

 

[SURVIVOR619]

Nickel controls for my P365.. with a stainless slide and black WC grip (still en route), it'll long look like one of the classic two-tone P series.

 

[Txhillbilly]

Ordered a Victor Titan 22 stock for my 10/22 last week, and finally found some SK Standard Plus and Rifle Match ammo in stock so I ordered another 1k rounds.

 

[mm54943]

3 boxes of 9mm Sig v-crown jhp

 

[Grumps21]

Ordered three new OEM mags for my Smith & Wesson 5906. The cucks on Gun Broker must not have gotten the memo that new old stock 15 rounders are still available, and they have used examples for $50+ and you still have to pay shipping and sometimes a 3% cc fee on top of that.

 

[PinnedandRecessed]

$80 off with code SSG80. Killer price with no tax and no shipping. First time buying from Simmons Sporting Goods so we will see how it goes. Primary Arms has the green reticle backordered till mid-Feb.

https://gun.deals/product/primary-arms-slx-1x-microprism-green-illuminated-acss-gemini-9mm-reticle-20249-after-code-ss

 

[Armybrat]