Clearing out the safe because I rarely get to shoot these days and want to raise some funds for my business / engine rebuild.
STI Trojan in Hard Chrome Finish - 9mm
The Trojan is the Texas built single stack 1911 hand made by STI. This one features a hard chrome finish (looks like stainless) with polished flats. Chambered in 9mm it has only seen brass case ammo and has about 500 rounds through it. The trigger break is in the 4 lbs. region and has a crisp let-off, pretty standard STI trigger which is better than what you'll find in most Kimbers (for reference). Comes with 3 mags, 1 STI and 2 Wilson Combat. Has adjustable STI rear sight and STI original wood grips.
$1300
STI Edge in Blue Finish - .45 ACP
The STI is the full length dustcover double stack 2011 made by STI in Texas. They are hand built guns and have excellent fit and finish. It has a bull barrel and a nice trigger that breaks in the 4.5 lbs. region with a crisp let-off. The recoil assembly is STI's dual spring setup which helps to soften the recoil some and aid feeding. I've put maybe 100 rounds through this gun and it comes with 3 magazines, all STI, 1 standard length 126mm (11 rnds) and two 140mm high capacity mags (14 rnds).
$1900
Palmetto Armory M4 Upper - 5.56mm -- SOLD
This is a complete upper sans bolt carrier group and charging handle. It has never been mounted or fired by me. It has an FN chrome lined 1:7 barrel on it chambered for 5.56mm NATO with an M4 profile and A2 flash hider. Gas block is the standard AR post sight along with a bayonet lug (extra dangerous!). The upper receiver is a slick top picatinny model.
$300
Ruger 10/22 - .22 LR -- SOLD
Brand new in the box Ruger 10/22. This is the basic version with a wood stock. I originally bought it to convert into a good lightweight hunting gun but unfortunately I never go hunting anymore, either. It's a plastic trigger guard model.
$225
Springfield TRP Operator "Half-Rail" - .45 ACP
This is one of Springfield's top end 1911s chambered in .45 ACP. It has a really good trigger in it and runs flawlessly. I've put about 800 rounds through this one and I really enjoyed shooting it. Extremely accurate bull barrel design along with tritium night sight inserts in an adjustable rear sight and front sight. It features a picatinny rail'd "half-rail" frame for mounting a weapon light and comes with 2 magazines (both Springfield mags). Don't confuse this with the lesser Operator model, this is the TRP version that is essentially the FBI HRT issue gun. It has front stippling that is extremely aggressive to aid grip with gloved hands, so if you are weak and like to bitch about your dainty hands getting hurt then this isn't for you. Springfield says 4.4 - 5.0 lbs. on the trigger but they are high, this gun has closer to a 3 - 3.5 lb. pull from the factory. Comes with the factory case which has a simple holster and mag pouch.
$1400
Pictures upon request. Items are all in great condition.
I am interested in quality M1s of any make; M1A, M1 Garand, M1 Carbine. I'm also interested in high quality FALs, HK long guns, and 5.45 AKs of top-tier make. I'm also OK with SBR trades or cheap MGs.
Email me at stidotorg@gmail.com
STI Trojan in Hard Chrome Finish - 9mm
The Trojan is the Texas built single stack 1911 hand made by STI. This one features a hard chrome finish (looks like stainless) with polished flats. Chambered in 9mm it has only seen brass case ammo and has about 500 rounds through it. The trigger break is in the 4 lbs. region and has a crisp let-off, pretty standard STI trigger which is better than what you'll find in most Kimbers (for reference). Comes with 3 mags, 1 STI and 2 Wilson Combat. Has adjustable STI rear sight and STI original wood grips.
$1300
STI Edge in Blue Finish - .45 ACP
The STI is the full length dustcover double stack 2011 made by STI in Texas. They are hand built guns and have excellent fit and finish. It has a bull barrel and a nice trigger that breaks in the 4.5 lbs. region with a crisp let-off. The recoil assembly is STI's dual spring setup which helps to soften the recoil some and aid feeding. I've put maybe 100 rounds through this gun and it comes with 3 magazines, all STI, 1 standard length 126mm (11 rnds) and two 140mm high capacity mags (14 rnds).
$1900
Palmetto Armory M4 Upper - 5.56mm -- SOLD
This is a complete upper sans bolt carrier group and charging handle. It has never been mounted or fired by me. It has an FN chrome lined 1:7 barrel on it chambered for 5.56mm NATO with an M4 profile and A2 flash hider. Gas block is the standard AR post sight along with a bayonet lug (extra dangerous!). The upper receiver is a slick top picatinny model.
$300
Ruger 10/22 - .22 LR -- SOLD
Brand new in the box Ruger 10/22. This is the basic version with a wood stock. I originally bought it to convert into a good lightweight hunting gun but unfortunately I never go hunting anymore, either. It's a plastic trigger guard model.
$225
Springfield TRP Operator "Half-Rail" - .45 ACP
This is one of Springfield's top end 1911s chambered in .45 ACP. It has a really good trigger in it and runs flawlessly. I've put about 800 rounds through this one and I really enjoyed shooting it. Extremely accurate bull barrel design along with tritium night sight inserts in an adjustable rear sight and front sight. It features a picatinny rail'd "half-rail" frame for mounting a weapon light and comes with 2 magazines (both Springfield mags). Don't confuse this with the lesser Operator model, this is the TRP version that is essentially the FBI HRT issue gun. It has front stippling that is extremely aggressive to aid grip with gloved hands, so if you are weak and like to bitch about your dainty hands getting hurt then this isn't for you. Springfield says 4.4 - 5.0 lbs. on the trigger but they are high, this gun has closer to a 3 - 3.5 lb. pull from the factory. Comes with the factory case which has a simple holster and mag pouch.
$1400
Pictures upon request. Items are all in great condition.
I am interested in quality M1s of any make; M1A, M1 Garand, M1 Carbine. I'm also interested in high quality FALs, HK long guns, and 5.45 AKs of top-tier make. I'm also OK with SBR trades or cheap MGs.
Email me at stidotorg@gmail.com