Need you alls help....I can not seem to be able to sight in my Aimpoint M3 2 MOA.
Please look at the pictures below and tell me what I need to do. The reactive target was my last 2 groups at 25 yards as I ran out of daylight. As for ammunition, I am using my own reload. I do not have the specs on it but I will get them as soon as I get a chance.
I am shooting off a bench and aiming dead center.
Using a different target.
If you all have some easier tips and tricks please feel free to share them.
These are the instructions from the user's guide.
To move the point of impact to the right, turn windage adjustment
screw counter clockwise (clockwise if screw located on left side).
• To move the point of impact to the left, turn windage adjustment
screw clockwise (counter clockwise if screw located on left side).
• To move the point of impact up, turn elevation adjustment screw
counter clockwise.
• To move the point of impact down, turn elevation adjustment screw
clockwise.
Please look at the pictures below and tell me what I need to do. The reactive target was my last 2 groups at 25 yards as I ran out of daylight. As for ammunition, I am using my own reload. I do not have the specs on it but I will get them as soon as I get a chance.
I am shooting off a bench and aiming dead center.
Using a different target.
If you all have some easier tips and tricks please feel free to share them.
These are the instructions from the user's guide.
To move the point of impact to the right, turn windage adjustment
screw counter clockwise (clockwise if screw located on left side).
• To move the point of impact to the left, turn windage adjustment
screw clockwise (counter clockwise if screw located on left side).
• To move the point of impact up, turn elevation adjustment screw
counter clockwise.
• To move the point of impact down, turn elevation adjustment screw
clockwise.