What have you done to your vehicle lately?

[Skip]

Added these 245-45-17 on friday, Nitrogen filled (because that's just what the shop uses). They included a free alignment from PEP BOYS, so we had that done yesterday (Sat). You have to click on the .JPG for the second pic for some reason, there is a pic of just the tire...

 

[Skip]

Replaced all the factory interior bulbs with CREE LED's.

 

[MCTex]

changed out the cv axle in my car. Darn thing was almost completely torn off and dry as Arizona! But now she is turning smooth. now on to replacing the brake rotors...

 

[Eckolancer]

Well someone stabbed my tire so getting a new tire put on.

Sent from my iPhone using Tapatalk

 

[ZX9RCAM]

Were you "parked" at the wrong house?

 

[RACER X]

From Houston to ft Smith , Ak

 

[grasshopperglock]

Ordered a set of All Balls fork seals. Only need to change out one side so I guess I'll have back up.

The seals show up tomorrow. Ill change them out when they get here.

5w oil and a bunch of 2x4's. Shouldn't take more then an hour.

 

[ZX9RCAM]

Going through some old photos.
This truck was in my garage when my house flooded in 2001, I wasn't home when it happened.
Also lost a motorcycle.

 

[Davetex]

That was a sharp truck Cam.

 

[grasshopperglock]

Nah. It's another turd Chevy. I'm surprised a spring rain didn't total it....lol

 

[Texasgordo]

What were the specs Cam? It looks great.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Davetex]

Nah. It's another turd Chevy. I'm surprised a spring rain didn't total it....lol

Haven't seen you around, doing OK I hope.

 

[Shady]

Added mini high torque starter, HEI distributor, long tube headers,Tubular upper and lower arms, Rims and tires, All new steering parts bushings and ball joints,New plugs,

I would have added new wires but ordered a set for points lol.

All new brake lines rebuilt rear drums added power booster and new master cylinder changed the front drums to discs.

Scraped out 20lbs of mud sand rocks oil and grease from everywhere.

Things I have but not installed, New american autowire update wire kit,Dakota digital gauges. Replacement sheet metal for all the rusted out stuff. 2 part primer.

Im not sure whats next if I want to do the wires or start on body and paint.

 

[grasshopperglock]

Haven't seen you around, doing OK I hope.

Thanks Dave.

Oh yeah, been doing good. Getting out in the summer sun.

I pulled the fork tube off the 'Suzzy'. Neighbors keep calling it that. Replaced both oil seal and dust seal but got wrong weight of oil. Needed 10w, bought 5w. The 10 stuff will be here tomorrow.

After I add the oil, I'm gonna have to grow a third arm. Compressing the inner spring while tightening the lock nut for the cap...while making sure oil doesn't go everywhere. Damn thing can't have the spring in the tube when oil is added. Oil first then the other mess. I'll end up making a tool...


After this, the rear wheel is next. Shaft drive. I need to check the breaks and make sure the drive shaft is greased. The bike has 3000 miles buts it's an 2008. It's sat for while.

 

[grasshopperglock]

Added mini high torque starter, HEI distributor, long tube headers,Tubular upper and lower arms, Rims and tires, All new steering parts bushings and ball joints,New plugs,

I would have added new wires but ordered a set for points lol.

All new brake lines rebuilt rear drums added power booster and new master cylinder changed the front drums to discs.

Scraped out 20lbs of mud sand rocks oil and grease from everywhere.

Things I have but not installed, New american autowire update wire kit,Dakota digital gauges. Replacement sheet metal for all the rusted out stuff. 2 part primer.

Im not sure whats next if I want to do the wires or start on body and paint.

That's badass.

 

[Vaquero]

Added mini high torque starter, HEI distributor, long tube headers,Tubular upper and lower arms, Rims and tires, All new steering parts bushings and ball joints,New plugs,

I would have added new wires but ordered a set for points lol.

All new brake lines rebuilt rear drums added power booster and new master cylinder changed the front drums to discs.

Scraped out 20lbs of mud sand rocks oil and grease from everywhere.

Things I have but not installed, New american autowire update wire kit,Dakota digital gauges. Replacement sheet metal for all the rusted out stuff. 2 part primer.

Im not sure whats next if I want to do the wires or start on body and paint.

Only 20 lb of mud?
Probably was setting in the perfect weight alignment too.
Now you gotta start over.

 

[orbitup]

Good progress.

 

[ZX9RCAM]

What were the specs Cam? It looks great.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

I can't give alot of details, 383, TPI, nothing really radical. I don't think it was much stronger than a 6.2 from the factory now, but back then (it was a 1991) a 350 was only something like 180hp.

 

[ZX9RCAM]

Nah. It's another turd Chevy. I'm surprised a spring rain didn't total it....lol

Well, it actually was totalled in my garage.

 

[ZX9RCAM]

Added mini high torque starter, HEI distributor, long tube headers,Tubular upper and lower arms, Rims and tires, All new steering parts bushings and ball joints,New plugs,

I would have added new wires but ordered a set for points lol.

All new brake lines rebuilt rear drums added power booster and new master cylinder changed the front drums to discs.

Scraped out 20lbs of mud sand rocks oil and grease from everywhere.

Things I have but not installed, New american autowire update wire kit,Dakota digital gauges. Replacement sheet metal for all the rusted out stuff. 2 part primer.

Im not sure whats next if I want to do the wires or start on body and paint.

Damn, you've done a HELL of alot of work to it.
Nice!