I don’t know what brand it is, just a cheap 3 port brake.Smitty, remind me what brake you used on yours. My buddy wont shoot his due to recoil. I can't find where you mentioned it before.
I don’t know what brand it is, just a cheap 3 port brake.Smitty, remind me what brake you used on yours. My buddy wont shoot his due to recoil. I can't find where you mentioned it before.
458! 458! 458!
350 is wwwwwwaaaaaayyyyy cheaper to build too.. It is winning as I do like the idea as we have a 351 Winchester in the family>350 Legend is waaaaay cheaper to shoot.
But it’s only a semi thumper.
Ok so its more like Legos but I do like it. I have 556 and 22lr from rifle to braced pistol. I am trying to decide what Caliber next only rule is locked breech not blow back.
So lets see what people want to see.
View attachment 226031
no the barrel is too thin for a rebore to a 30 cal round. Those M16/M16a1 all have pencil barrels.uilim; All,
.30 HAM'R??
Personally, I want a RVN-era M16A1 "parts kit" made into a FOLDING STOCK carbine with 16" barrel, that will fit into a "horn-case" & will look VERY LOW-KEY when cased/transported.
(Think: Tommy-Gun in a violin case.)
Fwiw, I cannot afford an AR18.
ADDENDA: Does anyone know if a circa 1970-style M16 barrel be rebored/rechambered to .30 HAM'R??
yours, satx
no the barrel is too thin for a rebore to a 30 cal round. Those M16/M16a1 all have pencil barrels.
no the barrel is too thin for a rebore to a 30 cal round. Those M16/M16a1 all have pencil barrels.
no idea but these guys or this page shows barrels for ar15 in https://www.grandviewoutdoors.com/guns/shaw-custom-barrels-300-hamruilim,
THANKS for the answer. - FYI, the early-1970s COLT M16 parts kit that I've found FOR CHEAP (<300.oo) has NO barrel included, so I'm wondering what diameter barrel that CAN be re-bored to .30HAM'R. - Any idea??
yours, satx
t
UGH no never liked them much.OP - next you should absolutely build an FN FAL....if you really enjoy a challenge.
I am thinking about it but I have too many 556 firearms and always worry about a 300 getting dropped into a 556 ... I know but it does happen way toooooo much to peopleI put together (with help from TheGomezClan guy) a 300 BLK pistol. I handloaded some 220 grain bullets to subsonic (I'm estimating about 1000/1200 fps. and it shoots great. Very little recoil and very little muzzle blast.
I am thinking about it but I have too many 556 firearms and always worry about a 300 getting dropped into a 556 ... I know but it does happen way toooooo much to people
I would think a .300 blackout or a 7.62x39 would work and need only be re-chambereduilim,
THANKS for the answer. - FYI, the early-1970s COLT M16 parts kit that I've found FOR CHEAP (<300.oo) has NO barrel included, so I'm wondering what diameter barrel that CAN be re-bored to .30HAM'R. - Any idea??
yours, satx
t
I would think a .300 blackout or a 7.62x39 would work and need only be re-chambered