Is your original gas block low profile style, or is it a gas block / front sight base (triangle tower)? Originals are installed with taper pins, just drive the pins out, FSB should slide off the front like normal. If its low pro, it could be pinned on or held on by set screws. Look at the bottom side to be sure.Anyone have a good suggestion how to remove the original gas block and a good suggestion for a low profile varible gas block for a suppressor?
Its the orginal front sight base.Is your original gas block low profile style, or is it a gas block / front sight base (triangle tower)? Originals are installed with taper pins, just drive the pins out, FSB should slide off the front like normal. If its low pro, it could be pinned on or held on by set screws. Look at the bottom side to be sure.
Gotcha…Now I know the type of guy you are. Thanks.If only the sum total of knowledge was at your finger tips and there was an easy way to search such a database.
Got any primers?
You'll get over it.Gotcha…Now I know the type of guy you are. Thanks.
Ah the elitist and entitled. Thank you for the welcoming tone.You'll get over it.
Now if you want to know how to change out a pistol grip....
Noob posting a bunch of obviously meaningless posts quickly will get push back. Are you just here to sell or contribute. These are the things we need to know to unravel the mystery of the Ghorman.
The real question is what type of guy are you.
We shall see.
Its the orginal front sight base.
I banged on them pretty hard without them moving. That is wear I started reading about adding heat.Have you pushed the pins out of the A2 front sight & it's stuck on the barrel or are they still in & not sure which direction to push them out?
The pins usually drive out left to right.
I want to changed the gas block because it currently has the two piece hand guards on it. Would like to add a rail were I can attach a front grip etc.If you are getting gassed, consider playing with buffers, springs and charging handles before messing with the gas block.
You'll get over it.
Now if you want to know how to change out a pistol grip....
Noob posting a bunch of obviously meaningless posts quickly will get push back. Are you just here to sell or contribute. These are the things we need to know to unravel the mystery of the Ghorman.
The real question is what type of guy are you.
We shall see.
Dude its fine. There is always one in the group. Its easy enough to block the tough internet guys.hey Jackass he posted days ago and I WAS THE ONE WHO LINKED HIM TO THE FORUM TO ASK ABOUT THE DILLON.
Calm your impotent testicles. The guy is asking questions because he wants to know.
See the linked post you f---in genius https://www.texasguntalk.com/threads/dillion-super-1050.115148/
Yeeehaaawhey Jackass he posted days ago and I WAS THE ONE WHO LINKED HIM TO THE FORUM TO ASK ABOUT THE DILLON.
Calm your impotent testicles. The guy is asking questions because he wants to know.
See the linked post you f---in genius https://www.texasguntalk.com/threads/dillion-super-1050.115148/
Okay thanks I’ll try again but i was reading for some reason the MP 15 its just a PITA to remove.All AR gas block pins are removed right to left.................
Except S&W are left to right................................