SPOILER ALERT: Purist's avert your eye's or go blind. You've been warned!
Couple few years ago I traded Yugo 59/66 furniture straight across for this set up. I had a SARCO barreled receiver laying about so I thought I'd turn the Khyber Pass Boys lose. This is what we ended up with, Shernic bull pucky. First off, of course, chop the barrel to 18.5", neutered FSB, Alby bolt carrier & mag, and I finally found a use for one of those honky vented gas tubes. At that barrel length, in the Shernic, the OAL is a bust, so I added a Ramline brake. Good by 1/4 inch now. Tapco piston, Murray trigger job & 2 piece FP, Shernic sock count, the whole she-bang is 922r worthy. Plus, I stayed with the stock mag which makes it GTG in Kali, even with it's evilness. Needs a light and she's ready for the mall ninja crowd. Weighs at least 5 kilos. PAX
Couple few years ago I traded Yugo 59/66 furniture straight across for this set up. I had a SARCO barreled receiver laying about so I thought I'd turn the Khyber Pass Boys lose. This is what we ended up with, Shernic bull pucky. First off, of course, chop the barrel to 18.5", neutered FSB, Alby bolt carrier & mag, and I finally found a use for one of those honky vented gas tubes. At that barrel length, in the Shernic, the OAL is a bust, so I added a Ramline brake. Good by 1/4 inch now. Tapco piston, Murray trigger job & 2 piece FP, Shernic sock count, the whole she-bang is 922r worthy. Plus, I stayed with the stock mag which makes it GTG in Kali, even with it's evilness. Needs a light and she's ready for the mall ninja crowd. Weighs at least 5 kilos. PAX
Last edited:
