Good plan.
It is kind of a catch 22. Once you start reloading you will see what work for you and what doesn't. Then you can upgrade or change pieces. But you won't know until you reload for a while.
What works for someone else may not be right for you either so advice from those with experience may or may not help too.
Back in the 60s I had a Texan turret press (no longer made) that was fantastic. It was so unwanted as strong as a single stage and had 7 stations on the turret.
You could use it as a single stage or use it as a semi progressive after dropping powder. Set it to seat then rotate to crimp. Sped up the last two steps considerably .
Be very careful, it's very addictive. Always some dodaddy you just have to have. I was going to suggest a 6.5 Creedmore for the rifle. If going for accuracy a single stage can't be beat. I like the Hornady presses for the setup they have for changing dies. It will be a good start and will always work. If you need more speed then go to a progressive for the non-critical stuff, like target 9mm but then they are cheap enough without reloading.
And, then you need a neck sizing die, case trimmer and of course good calipers, primer pocket reamers, neck reamers, concentric gauge, case annealer, and the beat goes on. Reloading manuals, different powders, primers, better cases, and the search for the bullet and powder combo your rifle likes. A chronograph to judge your loads for Standard Deviation vs accuracy.
Better quit before I run you off. BUT it's fun.
Thanks man and thank you for posting the pictures of all those older presses. Real nice collectionCongrats on your purchases MTA89, you’re off to a good start.
I will look at that now thanks for the suggestionCongrats on the new press & RA308.
Reloading has become a hobby i enjoy all aspects of. From brass whoring to shooting it
I was gifted a free press at the beginning of the year & a month later i had spent over $900 on dies, calipers, caliber plates, brass trimmer, scale, pin tumbler & on & on.
Ive probably spent at least that on primers, powder & lead since then.
I like being able to go out in the garage & escape from everything & off the couch.
When it comes to cleaning brass Ive tried 3 methods to cleaning brass. Media, Ultrasonic & pin tumbling. I think pin tumbling is the way to go. It cleans the primer pockets better & doesn't take as long to get clean. If i was a beginner i would go straight to pun tumbling.
Just my .02
Hornady makes an adapter kit that fits most presses with a bushing in them if one were to want to use that system.Be very careful, it's very addictive. Always some dodaddy you just have to have. I was going to suggest a 6.5 Creedmore for the rifle. If going for accuracy a single stage can't be beat. I like the Hornady presses for the setup they have for changing dies. It will be a good start and will always work. If you need more speed then go to a progressive for the non-critical stuff, like target 9mm but then they are cheap enough without reloading.
And, then you need a neck sizing die, case trimmer and of course good calipers, primer pocket reamers, neck reamers, concentric gauge, case annealer, and the beat goes on. Reloading manuals, different powders, primers, better cases, and the search for the bullet and powder combo your rifle likes. A chronograph to judge your loads for Standard Deviation vs accuracy.
Better quit before I run you off. BUT it's fun.
Alright. Went back and forth for a few days but I decided to go on Natchez and shop around. They have the Hornady Lock-N-Load Classic Kit for $269.99. I added a bunch of other stuff but it turns out they charge tax now I guess.
I went over to Mid South and got the Hornady press kit, dies, lee 2nd edition and a couple of MTM cases for $330 shipped. Taxes can suck a fat one. Also Hornady has a promo going for $500 free bullets ($15 for S&H) if you buy a press kit.
I also ordered my rifle of gunbuyer.com who is awesome and still doesnt charge tax
Ruger American .308 in GO Wild Camo for $491 shipped
View attachment 189992
Pretty excited to get all my reloading gear. I am going to Cabelas tomorrow to pick out all the consumables
Lol yep. I am still refusing to pay online sales tax for as long as possible. Glad mid south had the same prices minus the taxJust look at all the money we save reloading....
Your statement is correct, however, the formula and manufacture of many of the powders has changed over time. This is especially true when the manufacture moves from overseas to US/Canada. For the most part there is an attempt to keep the "weight/mass" loading table the same or close to the same. However, the volume of the powder is many times noticeably different. Expect to continue to see new powders that are "cleaner" and more friendly to the environment (along with primers). For example, expect to see W244 be the long term replacement for HP38/W231.Reloading formulas never die. I've got manuals that are 30 years old and I still use them occasionally. I don't use a progressive press because I don't shoot that much. Once I find an accurate load for a gun/caliber, I just make note and continue on. I would only make one suggestion, don't deviate from a published load, regardless of it's age. If something needs to change (or improve), find a different powder, etc.
Edit to add: I use RCBS and have found it to be very good. Customer service is unbelievably great. I've called them (and yes you talk to a person!) and asked about ordering a new bullet puller because mine broke and was told there was no charge and they would send me one. I got it two days later!
Locally, Cabelas has powders at about 10% higher than gun show prices. Primers are usually about 25% higher. Bullets are by far cheaper purchased directly from on-line sources, e.g. Rocky Mountain, Acme, Eggleston, Badman, missouribullet.com etc. I am finding that coated bullets work well if handled carefully.Thanks everyone I am heading to cabelas after work so I will see what they have there. Not sure I will buy anything there but I am going there to buy my rifle that I will be reloading for. I got a bad feeling I will be walking out of there broke lol
Yea but at cabelas I dont have to listen to some asshole shoot off a stun gun every 2 minutes lolLocally, Cabelas has powders at about 10% higher than gun show prices. Primers are usually about 25% higher. Bullets are by far cheaper purchased directly from on-line sources, e.g. Rocky Mountain, Acme, Eggleston, Badman, missouribullet.com etc. I am finding that coated bullets work well if handled carefully.