- Apr 15, 2013
- 18,609
- 96
My experience with the match champion was not too great, the cylinder was contacting the forcing cone at one spot, and the rear sight pin constantly walked out after only a few rounds.Thank you! Those are Hideous!
This is a topic near & dear to my heart.
Despite the full-lug barrels and vent rib on one of them, the Korth or Manurhin are the only ones that might suit me out of the box. Plus they’re quite pricey.
So I’ll stick with American made.
Despite the obvious advantages of stainless, I’d prefer a blued finish.
I love Smith K-frames, but durability with magnums disqualifies them. Quality issues disqualifies anything current.
The registered magnum is a great revolver, but too big.
The L-frame would be Goldilocks, we’re it not for the full lug.
A 586 Mountain Gun would be awesome, especially if built to pre-1966 standards. If Smith offered one now, I might overcome my distaste for their current offerings.
The Pythons predecessor, the Three-Fifty-Seven would check most of my boxes, however, both models went out of time frequently due to the hand bearing on the ratchet at ignition, and there’s not a lot of gunsmiths around anymore who know how to work on them.
The current Python supposedly fixes that, but it would need a reshaped barrel, replace the vent rib and new rear sight. But then we’re approaching the cost of an MR73 for a gun that would look like a Trooper MK III. No thank you.
The GP100 in the MC trim is a fine revolver with new sights (Bowen RC rear) and a real action job. Mine is a 10mm. I still prefer Smiths for DA shooting. Plus it’s a bit heavy.
My current candidate is a 160-series 4-inch Security Six. As soon as another custom project is complete, it will be going off to a gunsmith for an action job and custom front sight.
Single action would be either an original Ruger flat top or Colt New Frontier, 4 3/4“ barrel.
I agree that those would be satisfactory out of the box. However, that's only taking into account double-action revolvers. I note that you only give one throwaway sentence to single actions at the bottom of your post.
So since you're RevolverGuy, could you dive a little deeper there? The Picra is big and only useful for special purposes. Freedom Arms, though, can make a very nice, surprisingly compact (if heavy) .357 if you go through the options list; a round-butt, 3.5" to 5" Model 97 would be pretty sweet.
What's your opinion of Picra and, especially, Freedom Arms?
My critic days are behind me. I really appreciate your post...it just left me wondering about SAs. Then you explained...Wow, didn’t know there was a literary critic prowling the forum.
...and all is made clear....perfect .38/.357 revolver. To me that’s a double action...
I'll stay with my first choice, Ruger Old Model Blackhawk with Super Blackhawk fixtures and a 2 1/2 Leupold since I am 73 and need a crutch to shoot 100 yards. Sold my second choice S&W 27-2 deep blue pinned and recessed target hammer and trigger huge old rosewood grips , SWEET trigger right out of box and even better 20years later! Never owned a Python but loved every one I got to shoot.
I still have the original barrel and yes a difficult choice, be competitive in the Arizona heat with a vent rib barrel- or stay with first round eliminations, so I bought a takeoff (the guy went to a 4") and had it ribbed.In that case I’ll give you a pass on the scope.
But you’re still guilty of crimes against a classic gun for the vent rib.
Didn’t you trade that for a Glock 19 a while back?
No matter how hard my wife makes me try to, I don’t think I could ever narrow it down to just one.
I agree but since I mostly punch paper and shoot 50-100 yards I prefer the 6"barrel... not as pretty but a little sweeter shooter at ranges and better sight radius.Aesthetically speaking, I find it hard to beat a 4 inched, half lugged, target stocks, trigger, and hammer, with the firing pin attached to the hammer, blued K-frame with no stupid hillary hole. Bonus points for being pinned and recessed.
I've owned a few Ruger DA revolvers. They are tanks for sure but they ain't pretty.
If we're going to describe fantasies, this thread could go in some really odd directions. Some guys here would love to describe the service crew that would be included in the purchase of their new revolver.10 or 12 shot 357 thats no fatter than a 686.
They said 'perfect' and perfect is usually a fantasy. There are always tradeoffs and things that could be better and things that are lacking with reality, just like all guns are not perfect. Some are good, bad, better and worse but all have issues.If we're going to describe fantasies, this thread could go in some really odd directions. Some guys here would love to describe the service crew that would be included in the purchase of their new revolver.