Amateur!I can show you how to get the last two cents worth of toothpaste out of the tube......
Cost ya ten bucks!
(I just roll it up and clamp a clothespin on it)
I can tell him how to put the toothpaste back in the tube. ;-)
Amateur!I can show you how to get the last two cents worth of toothpaste out of the tube......
Cost ya ten bucks!
(I just roll it up and clamp a clothespin on it)
Simple solution? Don't roll up the tube, simply lay the handle of the toothbrush across bottom of tube laying on the bathroom counter and push down and toward the cap. It will get every drop of the toothpaste out. You don't have to use the handle every day, but it works easily.For
@IXLR8 (OP) & thanks to @alternative, I now have this, using a 2.5" cotter pin & a (approx) size 8 or 10 x 3/4" metal screw & a binder clip..
Pretty elaborate setup. The binder clips work just fine alone because I use them on my Denture cream too.For
@IXLR8 (OP) & thanks to @alternative, I now have this, using a 2.5" cotter pin & a (approx) size 8 or 10 x 3/4" metal screw & a binder clip..
On the subject of lead, My wife switched into full Chritmas decorating mode Tuesday, starting with the tree. I told her that a lot of the fun of decorating went out the windwo when they quit making tinsel out of wholesome, healthy, electrically conductive lead! I miss the sparks and lead vapor rising off of the train tracks as of pieces of tinsel fell across the rails of the train that was circling the tree.Cranky old are free be cranky about anything but "Cranky old guy's"...
I'll start:
Don't you hate modern toothpaste tubes? You roll 'em up and the next time you go to use it, you have roll it all up again. It was better when they were made out of lead sheets...
But the Sigs might. :-)Agreed. Those Glocks ain't gonna shoot themselves...
Another day in the life of ZOD!Why the hell can't people listen to and understand simple instructions? I went to get a beard trim. I told the woman as I sat down, "Okay. What I need is literally a haircut on my chin. Take a couple of inches of length off," (and at this point, I put two fingers around the length of my beard as one would do if they were about to cut it) "but do not shape it, style it, or sculpt it - just cut the length and even things up."
Not a difficult concept, right?
First thing the idiot does is grab clippers and cut a swath out of the left side of my chin.
"Annnd...you're doing exactly what I told you not to," says I, rather grumpily.
"But you said you wanted it trimmed..."
"I said I wanted the length cut, and not to shape it. But now you have to finish it the way you're doing it, which is not what I want."
"Well I'm sorry," she says defensively, "I'm a cosmetologist, not a barber."
"And I was pretty clear what I wanted. I told you, cut it like a haircut except on my chin. I even showed you how long!" As I said this, I showed her again, and once again held the hair with my fingers exactly as one would if cutting it.
"OH!" she says, "You really meant that?"
WTF? Why would I fucking say something as a set of instructions if I didn't mean it? So now I've got a beard trimmed exactly the way I don't like, which I had to fucking spend 30 minutes evening up because she did a shitty job of it even the way that she wanted to do it. Seriously - the side of my chin that she started with cutting wrong wound up almost an inch longer than the other side!
Fucking hell.
Another day in the life of ZOD!
Was she cute?
No! She looked like Abe Vigoda!
I can agree with your opinion on cornbread, but sugar does not belong in tea either. I never understood the sweet tea thing.Sugary cornbread. WTF! Cornbread should come from corn crushed by stone mills - add eggs, flour, baking powder, oil - perfection! I was in our pantry and found a goddamn box of Jif Cornbread! Wife must have lost her mind. Dug out the real cornmeal and have a batch in the oven. Sugar should go in sweet tea, not my cornbread.